Post Reply

[q] help phone wont boot im stuck on a yellow triangle

3rd January 2014, 09:31 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
8 posts
Join Date:Joined: Jan 2014
i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."


<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1

my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
3rd January 2014, 10:05 PM   |  #2  
Junior Member
Thanks Meter: 2
 
17 posts
Join Date:Joined: Sep 2010
More
When you tried the me7 tat what happened


Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side

Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
3rd January 2014, 10:14 PM   |  #3  
OP Junior Member
Thanks Meter: 0
 
8 posts
Join Date:Joined: Jan 2014
Post here are both mdk and me7 failures
Quote:
Originally Posted by jwoods82

When you tried the me7 tat what happened


Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side

Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr


<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_u ser_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NON-HLOS.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Im using Odin v1.85
4th January 2014, 02:07 AM   |  #4  
k1mu's Avatar
Recognized Contributor
Flag Virginia
Thanks Meter: 1,552
 
1,910 posts
Join Date:Joined: Apr 2011
Donate to Me
More
Quote:
Originally Posted by A1C_Malone

i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."


<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1

my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help

"Fused:5" indicates that you're running a MJ7 bootloader.

If you can boot, check the bootloader revision. Otherwise, flash MJ7. Then de-friend that friend if you actually did start with MDK.
The Following User Says Thank You to k1mu For This Useful Post: [ View ]
5th January 2014, 07:57 PM   |  #5  
Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Jul 2009
I had the same problem ...
i take an other usb cable (samsung of course) and try on another port on my pc
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Verizon Samsung Galaxy S 4 Q&A, Help & Troubleshooting by ThreadRank