Tablet CWM and root for GoClever TAB R76.2

First of all:

I am not responsible for any damage to your tablet, pc, house or anything else which could be caused by installing this.
By installing this you will void your warranty.
If you have understood everything here is the procedure for installation.

1) Download everithing from the links posted
2) Unpack Driver installer, run driver installer
3) Unpack R76_2_CWMRecovery_6.0.3.1.zip
4) After the driver has been installed, run RK29update.exe from the unpacked R76_2_CWMRecovery_6.0.3.1.zip
5) Turn off your tablet, connect it via USB to your pc, don't touch anything in the RK29update.exe, just wait till it shows FOUND RKANDROID ROCK USB
6) Press the run button
7) Wait for the process to finish
8) After it is finished, turn on the tablet, and paste into internal sd the SU zip
9) Turn off your tab again, then turn on but you need to press at the same time POWER, Vol+ and Vol- button to acces recovery
10) From the recovery, flash the SU zip to root your tab and reboot to system
11) Voila, now you have rooted GoClever R76.2 with CWM
12) Press Thanks if it worked for you

Downloads:
Driver installer http://www.mediafire.com/download/jf...rInstaller.zip
CWM installer http://www.mediafire.com/download/2y...ry_6.0.3.1.zip
Root http://www.mediafire.com/download/a7...arm-signed.zip