Post Reply

[RESOLVED][Q] error when try install ClockWorkMod Recovery v6.0.4.4.

9th January 2014, 10:46 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Jan 2014
hello guys,
I tried to install ClockWorkMod Recovery v6.0.4.4. on my GT-I9505 But during installation the following error appeared in Odin

<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


after that it no longer starts.
just enter in download mode and the following message appears!
firmware upgrade encountered an issue. please select recovery mode in kies and try again

How should I proceed? I think it does not protrude "write"

what has been tried!
Recovery whit kies
to install by odin stock rom (downloaded on sammobile)
to instal again ClockWorkMod Recovery
both without success


Thanks in advance!

(sorry by my google english)
Last edited by peuzenhu; 10th January 2014 at 04:06 AM. Reason: doubt clarified
9th January 2014, 10:57 PM   |  #2  
Joku1981's Avatar
Senior Member
Thanks Meter: 554
 
1,807 posts
Join Date:Joined: Jun 2012
Donate to Me
More
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
10th January 2014, 12:51 AM   |  #3  
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Jan 2014
the same error in odin
Quote:
Originally Posted by Joku1981

- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE

the same error in odin,
the same happened again

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!


PDA in file philz_touch_6.08.9-jfltexx.tar.md5
10th January 2014, 01:38 AM   |  #4  
Joku1981's Avatar
Senior Member
Thanks Meter: 554
 
1,807 posts
Join Date:Joined: Jun 2012
Donate to Me
More
Quote:
Originally Posted by peuzenhu

the same error in odin,
the same happened again

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!


PDA in file philz_touch_6.08.9-jfltexx.tar.md5

Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
Last edited by Joku1981; 10th January 2014 at 01:44 AM.
The Following User Says Thank You to Joku1981 For This Useful Post: [ View ]
10th January 2014, 01:48 AM   |  #5  
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Jan 2014
another PC
in the first post I was in my house.
but now I'm at work, not just another port but too as other machine.

=x

edit
I tried once more
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!


something changed?
Last edited by peuzenhu; 10th January 2014 at 02:55 AM. Reason: add
10th January 2014, 03:21 AM   |  #6  
OP Junior Member
Thanks Meter: 0
 
11 posts
Join Date:Joined: Jan 2014
Thumbs up
Quote:
Originally Posted by Joku1981

Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC


I do not believe, I tried on a computer with windows XP. And surprisingly it worked!

Thanks Joku1981
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy S 4 Q&A, Help & Troubleshooting by ThreadRank