Post Reply

[Q] Hard bricked?

12th January 2014, 12:49 AM   |  #1  
OP Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Jan 2014
So I've acquired a AT&T Captivate. I tried to do a System update from froyo to gingerbread(I think...its been a few weeks since the process...)anyway...the power went out and now im left with what im fearing is a paper weight...I cant enter any mode (download, recovery etc) and the only button combo that works is the VOL+ and POWER pressed together for apx 10 seconds...a screen comes up displaying RST_STAT =0x1, PMIC_IRQ1=0x0, PMIC_IRQ2=0x0, PMIC_IRQ3=0x1 PMIC_IRQ4=0x00 PMIC _STATUS2=0x0...all in orange..This is off battery with no cable attached. Im kinda hoping this means that im not totally SOL and this can be fixed...can anyone point me towards a fix, ive looked around and cant find anything conclusive....
12th January 2014, 01:06 AM   |  #2  
4-2ndtwin's Avatar
Recognized Contributor
Flag Arkansas
Thanks Meter: 2,481
 
3,037 posts
Join Date:Joined: Dec 2010
Donate to Me
U just need a Jig to get into Download mode. Either make or buy one. Ur phone is recoverable, as it is not hard bricked.
Once u get into download mode, flash Stock i897ucKK4 GB 2.3.5 and continue from there.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
Last edited by 4-2ndtwin; 12th January 2014 at 01:09 AM.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes