[Q] ACMEInstaller won't reboot...

169 posts
Thanks Meter: 29
By McBeanTIO, Senior Member on 6th January 2014, 03:53 AM
Post Reply Subscribe to Thread Email Thread
Was attempting to mod a second HPTP that I have, and inadvertently ran ACMEInstaller3 a second time with nothing in the cminstall folder. It's been about 2 hours, and the device hasn't rebooted. My power button is damaged so I can't force a reboot of the system.

It's just stuck on the "dos" screen with the penguins with this symbol: "[ . ]" (without the quotes).

If I've got novacom installed, is there a line command to reboot the system?

Right now, my plan is to just let the battery drain and re-charge. Any other ideas out there?

12th January 2014, 03:01 AM |#2  
If there's nothing in the folder then it's not doing anything so just hold home and lock for 30 seconds till it reboots.

Fully battery draining can permanently brick a touchpad (although mines never done it). So I would really really not do that.
Post Reply Subscribe to Thread

acmeinstaller, line, line command, touchpad

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes