5,606,779 Members 37,486 Now Online
XDA Developers Android and Mobile Development Forum

[Q] [Help] Galaxy s4 brick

Tip us?
 
Honter1
Old
(Last edited by Honter1; 15th January 2014 at 05:43 PM.)
#1  
Junior Member - OP
Thanks Meter 0
Posts: 1
Join Date: Jan 2014
Default [Q] [Help] Galaxy s4 brick

Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
 
Repulsa
Old
#2  
Repulsa's Avatar
Recognized Contributor
Thanks Meter 1484
Posts: 1,643
Join Date: Nov 2010
Location: Your Mom's crib

 
DONATE TO ME
Quote:
Originally Posted by Honter1 View Post
Hi everyone
I have a problem with my Samsung Galaxy S4 I9505 and its that it doesn´t pass from the Samsung logo
I tried to flash a custom rom from the recovery mode but it only says "faild" so after that I tried to wipe
cache and system partitions and I did a Factory reset on the recovery mode and nothing it still staying
on the samsung logo I also tried to flash a stock rom with ODIN and it only says the following log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUEMKE_I9505UUBEMKE_I9505VJUEMKE_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

I dont know what more I can do please help me and from now a lot of thanks and sorry if I had some grammar mistake I am practicing my English
Hi there Follow the tutorial from this thread http://forum.xda-developers.com/show...77&postcount=1 Have a nice day.
 
Quote:
That awkward moment when you're reading this comment and can't stop reading because you are so intrigued by it,that you keep reading,and then you realize it says nothing important.



If I've helped you at all, PLEASE, atleast hit that thanks Button right there >

Remember "Im not responsible if anything happen to your phone as a result of flashing anything"
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes