download from development section android usb driver
download recoveryblob from
download viper mod from
Official Asus update from ASUS site
Unzip usb driver
now plug the tablet at your pc with usb cable and boot you TF in recovery mode (press togheter and hold volume down and power... when you see same line in the upper left corner press volume up)
your pc will recognize a new hardware...
install new usb driver...
unzip vipermod zip and put recoveryblob file in vipermod folder... where you see a file named adb.exe
open a console in windows
start and in search line type cmd
in console go to vipermod folder
adb push recoveryblob data/media
wait 4-5 minutes
you will see this symbol #
ln -s /dev/block/mmcblk0p4 /data/local/tmp
dd if=/sdcard/recoveryblob of=/dev/block/mmcblk0p4
The command prompt will be empty as when nothing happen, do not panic wait until the end of the process. DO NOT INTERRUPT (it will take apx.3-10 min)
When you see the following message:
8860+1 records in
8860+1 records out
4536396 bytes transferred in 1.718 secs (2640509 bytes/sec)
(the numbers in resulted message may be different but it has to have the same structure) You can safety reboot the device (hold power botton)
power on your device and you will see ASUS EeePAD flashing progress bar. Be patient and wait till the end.
unzip ASUS update file e copy the folder in a external sd
put sd in your device
put device in recovery mod (it will be a new one.. rouge...)
install zip from sd card
install from external storage
go in asus folder e select the zip file
wait the end and reboot device
at this point I incurred in encryption error but just after the first reboot the problem was solved...