Post Reply Subscribe to Thread Email Thread

Multitouch Query

21st January 2014, 07:03 AM |#1  
OP Member
Thanks Meter: 3
54 posts
Join Date:Joined: Oct 2011

I have been wondering if there is any possibility of increasing the multitouch on my u8800. Its currently on two finger touch and i am using Blefish's CM11 rom. My TS is synaptics. Can I have like 3 to 5 finger touch???
21st January 2014, 11:12 AM |#2  
Blefish's Avatar
Senior Member
Flag Paluküla, Hiiumaa
Thanks Meter: 2,564
909 posts
Join Date:Joined: Aug 2011
Donate to Me
As far as I know, Synaptics TS is hard-limited to 2 points. It could be possible in hardware, but it would involve replacing the firmware on the chip. But on Atmel TS it's possible and implemented. Atmel TS has a firmware too, but it also has configuration. Configuration allows the changing of multiple parameters, including number of points tracked.
21st January 2014, 12:27 PM |#3  
Junior Member
Flag lisbon
Thanks Meter: 2
3 posts
Join Date:Joined: Apr 2010
Problem installing gapps on CM11

I have installed CM11 and until now there are no serious problems. Almost every thing works well so far.
However I have not been able to install gaps after several attempts. Is there someone who can help me to solve this problem.
Your help would be greatly appreciated.
Thanks in advance
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes