Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

[Q] Wintec Filemate Clear T720 I flashed a bad CWM recovery

OP ws848

26th January 2014, 07:33 PM   |  #1  
OP Junior Member
Thanks Meter: 1
 
4 posts
Join Date:Joined: Aug 2009
Hello,

on my Wintec Filemate Clear T720 I flashed a bad CWM recovery (CWM-based Recovery v6.0.1.0 for A10C (LY-F1/TREQ) by flowish) was is not designed for my device. First I had think, that A10 means the processor. But it isn't. It's a another product!

Now the tablet boots only in recovery or bootloader mode.
I can't install anything, because I get the following errors:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log

Even, the original T720BK07-update_20121214.zip isn't installable. It's Android 4.0.3

In recovery mode, I can put adb commands, but after reboot, the tablet goes allways in CWM recovery.
I can boot into the bootloader too.
Livesuit or PhoenixUSBPro shows allways Error 0x120 or 0x162, based on the image I like to flash.
Livesuit shows "Image file invalid" or "No device that need to update !" based on the images i tryed.

Here are some infos I get from adb in recovery mode:
adb devices
List of devices attached
2008044236 recovery
-
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 59.63
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 0000000000000000
-
cat /proc/partitions
major minor #blocks name
179 0 7977472 mmcblk0
179 1 7446096 mmcblk0p1
179 2 500162 mmcblk0p2
179 3 31182 mmcblk0
-
cat diskstats
1 0 ram0 0 0 0 0 0 0 0 0 0 0 0
1 1 ram1 0 0 0 0 0 0 0 0 0 0 0
7 0 loop0 0 0 0 0 0 0 0 0 0 0 0
7 1 loop1 0 0 0 0 0 0 0 0 0 0 0
7 2 loop2 0 0 0 0 0 0 0 0 0 0 0
7 3 loop3 0 0 0 0 0 0 0 0 0 0 0
7 4 loop4 0 0 0 0 0 0 0 0 0 0 0
7 5 loop5 0 0 0 0 0 0 0 0 0 0 0
7 6 loop6 0 0 0 0 0 0 0 0 0 0 0
7 7 loop7 0 0 0 0 0 0 0 0 0 0 0
179 0 mmcblk0 180 15379 15566 740 15 30 45 790 0 790 1530
179 1 mmcblk0p1 179 15379 15558 740 15 30 45 790 0 790 1530
-
adb shell df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 416864 52 416812 0% /dev
tmpfs 416864 4 416860 0% /tmp
-
cat /proc/mounts
rootfs / rootfs rw 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600,ptmxmode=000 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /tmp tmpfs rw,relatime 0 0
-
df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 407.1M 52.0K 407.0M 0% /dev
tmpfs 407.1M 4.0K 407.1M 0% /tmp
-
adb shell ls
boot emmc sd-ext
bootloader etc sdcard
busybox init sys
cache init.rc system
data proc tmp
datadata res ueventd.goldfish.rc
default.prop root ueventd.rc
dev sbin ueventd.sun4i.rc
-

Has someone an idea to repair my tablet?

Best regards

Walter
Post Reply Subscribe to Thread

Tags
cwm, filemate clear t720, recovery
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes