Post Reply

Issues Installing Stock Firmware

OP jrp27540

1st February 2014, 07:50 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Jan 2013
I am trying to install the stock firmware back on my phone. Right now I have it soft bricked.

When I go into the download mode (volume down, home button, power button) I see several items in the upper left hand corner of the screen:
ODIN MODE
PRODUCT NAME: SPH-L720
SYSTEM BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE enabled


When watching videos, I dont see this many listings on other peoples phones.

When I use ODIN to lay down the stock firmware it fails and I get the following errors from ODIN:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)


My phone now shows the following:
ODIN MODE
PRODUCT NAME: SPH-L720
SYSTEM BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE enabled
START [224, 1448]
SW REV.CHECK FAIL : fused : 4 , Biney : 1


Any suggestions?

Thanks!
2nd February 2014, 12:28 AM   |  #2  
leaderbuilder's Avatar
Senior Member
Somewhere in the dark and wet Northwest.
Thanks Meter: 1,245
 
2,289 posts
Join Date:Joined: Dec 2007
More
Quote:
Originally Posted by jrp27540

I am trying to install the stock firmware back on my phone. Right now I have it soft bricked.

When I go into the download mode (volume down, home button, power button) I see several items in the upper left hand corner of the screen:
ODIN MODE
PRODUCT NAME: SPH-L720
SYSTEM BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE enabled


When watching videos, I dont see this many listings on other peoples phones.

When I use ODIN to lay down the stock firmware it fails and I get the following errors from ODIN:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)


My phone now shows the following:
ODIN MODE
PRODUCT NAME: SPH-L720
SYSTEM BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE enabled
START [224, 1448]
SW REV.CHECK FAIL : fused : 4 , Biney : 1


Any suggestions?

Thanks!

What firmware where you on?
What firmware did you try to flash and where did you get it?
I bet if you searched you'd find many threads about MK2 soft bricked/not booting/stuck at boot etc. Many of them.
2nd February 2014, 04:20 PM   |  #3  
cruise350's Avatar
Senior Member
Flag Memphis, TN
Thanks Meter: 589
 
1,865 posts
Join Date:Joined: Dec 2007
More
You can't install an old firmware on a phone that has been updated to 4.3. That is the error you get. Download the MK2 tar from here and intstall: http://forum.xda-developers.com/show....php?t=2601443
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes