5,605,311 Members 38,751 Now Online
XDA Developers Android and Mobile Development Forum

[Q] Ace2 s7560 as a s7562

Tip us?
 
freakybaby
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Dec 2013
Default [Q] Ace2 s7560 as a s7562

Ok, a long story here.

My son dropped his Samsung Ace2x s-7560m phone. The screen cracked. I bought a replacement screen through a reputable seller on ebay.

After installing the screen, the s7560 starts, but freezes on the Samsung screen, then boots over. This goes on and on.

I rooted the phone and flashed a 7562 stock rom to the device. The only difference between the two devices is that the 7562 is a dous phone.

The flash went well, and after rebooting, the phone boots up. It starts out as a 7560, then the screen flickers and becomes the 7562 duos.

The phone boots up. I can surf online using wifi, and the screen reacts as it should for the whole screen.

Now, when I try to call out the call does connect, but I can't end the call. The phones network does not work at all.

I have tried to enter into the recovery and can , but only by using adb. The key combos don't work. I can get the phone to boot into download mode.

The bootloader still shows as a 7560, and the software shows as a s a 7562. I think what is happening is the seller from ebay has sold me the duos screen instead of the 7560. He has refunded the money, and told me to keep the screen, so now it has become a bit of a challenge that I will defeat.

I am wanting to get the phone working. I have found a rom called kyleopen, but all the download links are removed or not working. I can put other files like cwm into the download file. When I try and access the sd card, I get an error that it can't mount it.

So..

Is there a custom rom that works on both the 7560 and the 7562 that can be installed using odin?
or:
Is there a way to flash the bootloader to be a 7562 model?

Is there a way to correct the screen issue..whereas I can still use a 7560 rom, and the screen will be detected.

As stated, I am trying to run the 7560 with a 7562's screen. I am guessing the digitizer is a bit different from device to device, and that the 7560 is just not recognizing the screen as being there. I have tried to flash the stock 7560 rom back onto the phone, but get the same issue..won't boot past the samsung screen.

Is there a file to alter to get the 7560 to accept the screen as the right one? I know the screen does work with the phone, and think the network issues I am having is because the duos feature of the rom flashed to the device.
 
freakybaby
Old
#2  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Dec 2013
Anybody have any ideas?
 
trixxie
Old
#3  
Junior Member
Thanks Meter 0
Posts: 3
Join Date: Jun 2006
Quote:
Originally Posted by freakybaby View Post
Anybody have any ideas?
Maybe too late.
In a call, usually if you canīt finish the call is because the proximity sensor is not working and didnīt detect that you separate the phone from your face, or when you disassembly and reassembly the phone you forgot the plastic mount of the infrared detector.

Did you get the two lines working? I mean, both phones are exactly same board and rest of the spares, but s7562 uses two sim cards, in a s7560 flashed with s7562 firmware are both sim cards works?

WBR
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes