Post Reply

Want To Make A ROM For Mate.

OP husen4u

6th February 2014, 08:05 AM   |  #31  
Senior Member
Thanks Meter: 913
 
496 posts
Join Date:Joined: Jul 2010
Donate to Me
Quote:
Originally Posted by surdu_petru

Yes, to be able to use KitKat for P6, you must have installed an unlocked firmware for HAM, but I do not think that you have ... unlocked firmware !

I managed to flash KK on my mate with locked bootloader.I used extracted files from update.app .This time my main problem is non-working touch.The second problem is with audio , Mate uses slightly different audio than the P6 , so loudspeaker is not working. With attached headphone sound is fine , so I think this is just a small audio routing problem.



The Following 2 Users Say Thank You to joe.stone For This Useful Post: [ View ]
6th February 2014, 11:06 AM   |  #32  
acbka's Avatar
Member
Flag minsk
Thanks Meter: 131
 
85 posts
Join Date:Joined: Feb 2013
Donate to Me
More
Quote:
Originally Posted by joe.stone

I managed to flash KK on my mate with locked bootloader.I used extracted files from update.app .This time my main problem is non-working touch.The second problem is with audio , Mate uses slightly different audio than the P6 , so loudspeaker is not working. With attached headphone sound is fine , so I think this is just a small audio routing problem.



Hi , kernel flashed...
Hi, what if you try to replace the touchscreen driver from another firmware, for example, from 907?
The Following User Says Thank You to acbka For This Useful Post: [ View ]
6th February 2014, 11:41 AM   |  #33  
Senior Member
Thanks Meter: 913
 
496 posts
Join Date:Joined: Jul 2010
Donate to Me
Quote:
Originally Posted by acbka

Hi , kernel flashed...
Hi, what if you try to replace the touchscreen driver from another firmware, for example, from 907?

Its a kernel issue. The mate only boots with untouched boot.img of P6 KK rom. I have ideas how to solve this issue , but need some time. I slightly modified the system.img too. The wifi , BT , ril working fine. I did not have time to test more. It was a first attempt to try . Unfortunatelly /proc/config.gz is not anabled and extract-ikconfig also not provided the kernel config , from boot.img's extracted kernel. First I will try to compile touch drivers as modules from kernel source , and then try to load it with insmod. If success , it will be loaded via install-recovery.sh as it is definied as a service in KK's init.rc even if the file itself is missing in system/etc.I'd like to put busybox and root too.The audio is a HAL problem and putting B907's audio HAL can solve the problem.
The Following 2 Users Say Thank You to joe.stone For This Useful Post: [ View ]
6th February 2014, 12:01 PM   |  #34  
acbka's Avatar
Member
Flag minsk
Thanks Meter: 131
 
85 posts
Join Date:Joined: Feb 2013
Donate to Me
More
Quote:
Originally Posted by joe.stone

Its a kernel issue. The mate only boots with untouched boot.img of P6 KK rom. I have ideas how to solve this issue , but need some time. I slightly modified the system.img too. The wifi , BT , ril working fine. I did not have time to test more. It was a first attempt to try . Unfortunatelly /proc/config.gz is not anabled and extract-ikconfig also not provided the kernel config , from boot.img's extracted kernel. First I will try to compile touch drivers as modules from kernel source , and then try to load it with insmod. If success , it will be loaded via install-recovery.sh as it is definied as a service in KK's init.rc even if the file itself is missing in system/etc.I'd like to put busybox and root too.The audio is a HAL problem and putting B907's audio HAL can solve the problem.

I was able to install on your phone via dload/update.app (for p6 original firmware 4.4)
@ECHO off
adb reboot Bootloader
fastboot flash cache cache.img
fastboot flash system.img
fastboot flash cust.img
fastboot flash userdata.img
fastboot reboot (p6 firmware) and 3 button flash 4.4 update.app, Please keep us up to date, ready to test any firmware
The Following 2 Users Say Thank You to acbka For This Useful Post: [ View ]
6th February 2014, 04:01 PM   |  #35  
husen4u's Avatar
OP Senior Member
Flag Kuwait
Thanks Meter: 1,397
 
1,055 posts
Join Date:Joined: Feb 2012
Donate to Me
More
HYD52ROM JB Is Ready For HAM

http://forum.xda-developers.com/show....php?t=2638601
The Following 2 Users Say Thank You to husen4u For This Useful Post: [ View ]
6th February 2014, 06:29 PM   |  #36  
surdu_petru's Avatar
Recognized Contributor
Flag Paris
Thanks Meter: 8,245
 
3,545 posts
Join Date:Joined: Feb 2010
Donate to Me
Quote:
Originally Posted by joe.stone

I managed to flash KK on my mate with locked bootloader.I used extracted files from update.app .This time my main problem is non-working touch.The second problem is with audio , Mate uses slightly different audio than the P6 , so loudspeaker is not working. With attached headphone sound is fine , so I think this is just a small audio routing problem.




Seems to be ok !

You can now, install custom recovery TWRP for KitKat -> TWRP 2.6.3.5 !
The Following User Says Thank You to surdu_petru For This Useful Post: [ View ]
6th February 2014, 06:57 PM   |  #37  
Member
Thanks Meter: 8
 
38 posts
Join Date:Joined: Jan 2014
More
Quote:
Originally Posted by surdu_petru

Seems to be ok !

You can now, install custom recovery TWRP for KitKat -> TWRP 2.6.3.5 !

so just install the TWRP on the HAM ?
or is there anything else needed `?
6th February 2014, 10:36 PM   |  #38  
acbka's Avatar
Member
Flag minsk
Thanks Meter: 131
 
85 posts
Join Date:Joined: Feb 2013
Donate to Me
More
Quote:
Originally Posted by surdu_petru

Seems to be ok !

You can now, install custom recovery TWRP for KitKat -> TWRP 2.6.3.5 !

i am installed you recovery , problem toucn not work into recovery =(
6th February 2014, 11:24 PM   |  #39  
surdu_petru's Avatar
Recognized Contributor
Flag Paris
Thanks Meter: 8,245
 
3,545 posts
Join Date:Joined: Feb 2010
Donate to Me
Quote:
Originally Posted by acbka

i am installed you recovery , problem toucn not work into recovery =(

It's normal, because not work also on KitKat !
7th February 2014, 12:18 AM   |  #40  
acbka's Avatar
Member
Flag minsk
Thanks Meter: 131
 
85 posts
Join Date:Joined: Feb 2013
Donate to Me
More
Thumbs up
Quote:
Originally Posted by surdu_petru

It's normal, because not work also on KitKat !

I was able to flash recovery P6 for firmware b118 and then again flash his stock recovery
kernel version 3.0.8-00831 , HAM work fine

The Following User Says Thank You to acbka For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Ascend Mate Android Development by ThreadRank