5,597,501 Members 31,638 Now Online
XDA Developers Android and Mobile Development Forum

Bricked my S4, ODIN fails to flash stock ROM... what do?

Tip us?
 
Huggaroot
Old
#21  
Junior Member
Thanks Meter 1
Posts: 3
Join Date: Feb 2014
Default Awesome job

Thanks for this thread you really help me out a lot. I was trying everything kies emergency recovery and everything thanks again for this thread.
 
xRodneyx
Old
#22  
Junior Member
Thanks Meter 0
Posts: 5
Join Date: Jan 2014
Quote:
Originally Posted by cbjjensen View Post
BEWARE, THIS WILL SET YOUR PHONE BACK TO STOCK YOU WILL LOSE ALL OF YOUR DATA

So, I was in pretty much the same situation as you are in. Here's what I did


First, Download, and install Odin 1.85 (here's a direct Download Link):

https://www.google.com/url?sa=t&rct=...p1ISlP2fzGKhtw

Extract it to a good location. Your Desktop will work

Next, Download the ORIGINAL Jellybean Stock Files from this thread:

http://forum.xda-developers.com/show....php?t=2504311
(here's a direct link: https://mega.co.nz/#!WEEzSA7Z!aB4673...FBcQAZjc1X7wAE )

Then, extract the files that is within the MF3 Tars file into their own seperate file.

Open up Odin 1.85

Make sure that your Phone is connected (It will be under the ID:COM, section).

Click Bootloader, and browse to the file location in which you saved the MF3 Tar Files.

Select the file named: BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_ MULTI_CERT.tar.md5

For PDA, use: PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MU LTI_CERT.tar.md5
*NOTE: IT MAY FREEZE UP A LITTLE BIT. BE PATIENT!!!!

For Phone, use: MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI _CERT.tar.md5

For CSC, use: CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MUL TI_CERT.tar.md5


Then Click Start, and Hope/Pray.

Good Luck





What about for sprint s4 i was on cyanogenmod 11 please help
 
c5downlow
Old
#23  
Junior Member
Thanks Meter 0
Posts: 3
Join Date: Feb 2014
Location: BOCA RATON
Quote:
Originally Posted by salimdawar View Post
Hurrah Its works for like a Charm, should every one who had the problem, followed the instruction and will be bring a smile on your face
I am trying to fix my soft brick.. I am following whats in the instruction... and I am getting this...

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_ MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MU LTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI _CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MUL TI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

plz help if possible. Thank you.
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes