Help needed, messed up CWM install

151 posts
Thanks Meter: 129
By Explore The Universe, Senior Member on 2nd March 2014, 12:16 PM
Post Reply Subscribe to Thread Email Thread
Hello, I got a new exynos4412 tablet and tried to build cwm (cwm builder) and install it.

So i take the stock recovery from mmcblk0p6 as recovery.img, unpacked it and take recovery.fstab, upload both files to cwm builder (recovery.img and recovery.fstab) got a new recovery image and flashed it.

my partition table (recovery.fstab)

# mount point	fstype		device
/param          emmc            /dev/block/mmcblk0p1
/misc           emmc            /dev/block/mmcblk0p2
/efs            ext4            /dev/block/mmcblk0p3
/boot           emmc            /dev/block/mmcblk0p5
/recovery       emmc            /dev/block/mmcblk0p6
/logo           emmc            /dev/block/mmcblk0p7
/cache          ext4            /dev/block/mmcblk0p8
/system         ext4            /dev/block/mmcblk0p9
/data           ext4            /dev/block/mmcblk0p10
/sdcard         vfat            /dev/block/mmcblk1p1
I flashed it using this command

dd if=/sdcard/cwmrecovery.img of=/dev/block/mmcplk0p6
Aand tablet isn't booting up now, just shows up the manufacturer logo and closing off and shows up the logo again.

I don't have acces to adb, and when i try to access recovery with button combination it does the same thing. (logo shows up, closes and again)

Any help reaally much appreciated.

Sorry for english.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes