Originally Posted by alogblog
Instead, I make a use of the arms of the mount. My arm of the mount doesnt clip the phone, it just hold the phone.
My last edition has bottom and right arms in the mount, so I can place the phone in landscape or portrait.
Haha I got the same chinese holder. The holder is good but the plastic surface where you can attach is doesn't hold it well.
However the suction is good on the windshield.
Originally Posted by my95z34
Roughly. I'd say 1-1.5. Somewhere in there.
Sent from my Nexus 5 using Tapatalk
I can't predict accurately how your phone will react to magnets with your case, but I can provide some guidelines with magnets and official bumper.
can hold the phone vertically
with its official bumper (1mm thick). Not very firmly but if you don't touch the phone it stays held by magnets.
is stronger for holding vertically
the phone with its bumper if you don't push it too much.
So 1/8" x 1/16" (3,175mm x 1,5875mm) cuboid magnets seem to be great with the phone's metal plates. I try to use the thickest magnets so they can hold the phone in a car, but you might want thinner magnets so you can put them easier in your horizontal charging surface. Please note that I only got those thicknesses : 1/32"
(3,175mm) and 3/16"
(4,7625mm). I still didn't try 1/32" (7,9375mm) thickness alone but it may be too thin. Maybe 1/16"
) for your use ?
Anyways you should get 8 magnets and do something similar to this mount
(4 x 2 magnets together).