Disclaimer: None of this is my work - I prepared this install instructions for my benefit and have not executed them yet - I will do so today and post results - I recommend you read this for clarity only but rely on experts and their posts (see Source below) for executing whatever changes you are making to your phone. Everything is at your risk!!!
Experts - please let me know if any corrections are needed - Last thing I want to do is brick everyone else phone.
1) |★NB1►DOWNGRADE★METHOD◄MK2★ | ★NB1★FULL★ODIN★UPDATE★NB1★ | ★Mar.08.2014★|
2) >>>DEADLY-VENOM-V3.0 KITKAT EDITION<<< POST # 4
Checkpoint 1 - Starting Point: You are on stock NB1
Section 1 - Downgrade from NB1 Stock to MK2 System - You will still retain NB1 Bootloader
Source: |★NB1►DOWNGRADE★METHOD◄MK2★ | ★NB1★FULL★ODIN★UPDATE★NB1★ | ★Mar.08.2014★|
Step1: Download 3 files from Post#1
2) 1AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_ C ERT.tar.md5
Step2: Go to download mode and ODIN the two files - PIT file in PIT slot and second file in PDA slot.
Step3: Boot into recovery and choose full wipe/factory reset
Step4: Re-root using SafeRoot
Step5: Reinstall SafeStap 3.71
Section 2 - DEADLY-VENOM-V3.0 KITKAT EDITION
Source: >>>DEADLY-VENOM-V3.0 KITKAT EDITION<<< POST # 4
Check Point 2: You are on NB1 Bootloader, MK2 System rooted via saferoot and have Safestrap v3.71 installed If your state is not as listed then stop now!!
Mirror : http://d-h.st/tGN
2) @rebel1699 CUSTOM KITKAT MAGIC TAR http://d-h.st/53g
Step1. Extract @rebel1699 Custom KitKat Magic tar contents and Odin 3.09 to an easily accessed location on your computer.
Step2. Place DVSS-V3-KITKAT EDITION on your external sd card
Step3. Reboot to safestrap. BACKUP YOUR CURRENT STOCK SLOT!!! Wipe stock slot wipe-advanced wipe- choose all except external sdcard
Step4. Install DVSS-V3-KITKAT-EDITION to stock slot.
Step5. Once the rom has sucessfully flashed, tap home button. Tap reboot, and choose reboot to download. (download mode). Phone will now boot to download mode.
Step6. Plug the phone into the pc, and open odin 3.09 (may require you to open as admin)
Now, in odin, add the files you extracted earlier from @rebel1699 CUSTOM KITKAT MAGIC TAR to their respective slot. BL>>>BL SLOT ....AP>>>AP SLOT ....CP>>>CP SLOT.
There is no need to tick any boxes. They do this automatically.
Once everything has loaded, hit start. Hopefully after it finishes and reboots, Venom 4.4 will boot.
Check Point 3 (done): You are on NB1 Bootloader, SafeStrap installed with Deadly Venom NB1 base ROM installed on System Slot
Repeat Disclaimer: None of this is my work - I prepared this install instructions for my benefit and have not executed them yet - I will do so today and post results - You are welcome to follow them at your risk!!!