FORUMS

HTC’s New Ad Campaign And What It Really Means

HTC has just released three new blind test adverts comparing app loading … more

XDA Picks: Best Apps of the Week (June 27 – July 4)

Apps are at the front and center of any smartphone experience, and with over a … more

HTC One M9 Developer Edition Android 5.1 OTA

The Developer Edition of the HTC One M9 is receiving an over-the-air update to Android 5.1. … more

Index Project For XDA Device Subforums

Another ambitious project from the collaborative efforts of Recognized Contributors and Forum … more

[Q] Official upgrade with FOTA failed - Odin3 FAIL as well

9 posts
Thanks Meter: 0
 
By dror.dahan, Junior Member on 17th March 2014, 07:25 AM
Post Reply Subscribe to Thread Email Thread
Hi,
I have GT-N7100 with official ROM. Few months ago I received an invitation to upgrade my ROM from 4.1 to 4.3
I have accepted the invitation and the upgrade was smooth and all was OK.
3 weeks ago I received another notification to update the ROM. It was also 4.3 and in the description it was mentioned as better stability.
I have accepted the invitation.
This time I started to get problems. The phone after reset got stuck on the first screen with the model name of "SAMSUNG GT-N7100".
I have HOME+POWER+VoluneUP and selected to clear all data to factory reset. - I still got the same stuck failure.
I tried to download various of official ROMs from sammobile (Hong Kong, UK, Israel, UAE) and install them with Odin3 but I got the same FAIL error in all of them.
Here is the log:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZSUENA1_N7100OZSENA1_N7100ZSENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"

On my phone I see the following text:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VIOD: 0
AP SWREV: A2

I tried to use KIES --> Tools --> Emergency firmware recovery -->
But the "List of devices requiring emergency recovery" is empty

When I restart my phone I get the following message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."

I don't know what else to do?
Can you advise?
Thanks,
Dror
 
 
17th March 2014, 12:19 PM |#2  
joy854's Avatar
Senior Member
Flag Bhopal
Thanks Meter: 68
 
More
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
The Following User Says Thank You to joy854 For This Useful Post: [ View ]
17th March 2014, 01:34 PM |#3  
OP Junior Member
Thanks Meter: 0
 
More
Question
Quote:
Originally Posted by joy854

Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.

I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
17th March 2014, 02:20 PM |#4  
joy854's Avatar
Senior Member
Flag Bhopal
Thanks Meter: 68
 
More
Quote:
Originally Posted by dror.dahan

I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.

Download philz recovery here http://goo.im/devs/philz_touch/CWM_A...-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.

HIT THANKS IF I HELPED YOU
The Following User Says Thank You to joy854 For This Useful Post: [ View ]
17th March 2014, 03:41 PM |#5  
OP Junior Member
Thanks Meter: 0
 
More
Question
Quote:
Originally Posted by joy854

Download philz recovery here http://goo.im/devs/philz_touch/CWM_A...-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.

HIT THANKS IF I HELPED YOU

I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"

Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"

So I couldn't continue according to the rests of steps as you described.
Attached Thumbnails
Click image for larger version

Name:	IMG_20140317_162928.jpg
Views:	20
Size:	230.1 KB
ID:	2635297  
17th March 2014, 04:49 PM |#6  
joy854's Avatar
Senior Member
Flag Bhopal
Thanks Meter: 68
 
More
Quote:
Originally Posted by dror.dahan

I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"

Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"

So I couldn't continue according to the rests of steps as you described.

I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
18th March 2014, 09:09 AM |#7  
OP Junior Member
Thanks Meter: 0
 
More
Question
Quote:
Originally Posted by joy854

I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.

Well it didn't worked for me.
I tried to do it again but now I get a failure:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"

Can you help?
Post Reply Subscribe to Thread

Tags
n7100 rom
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes