Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

[Q] Note 8.0 N5100 root problem

OP miloslavc

30th March 2014, 12:31 AM   |  #1  
OP Junior Member
Thanks Meter: 2
 
15 posts
Join Date:Joined: Feb 2014
Hello,i recently got Note 8.0 N5100 with official 4.2.2 and i decided to root it. I used CF-Auto-Root and followed instructions, downloaded newest drivers and everything went well in odin 3.07 but after odin finished i got stuck wirh samsung galaxy note logo and nothing happens now.
what shall i do now, can anybody please help me!!!!!!!

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Problem solved. I exidently when i was using search in cf auto root website downloaded wrong cf file for p5100 instead of n5100.
Last edited by miloslavc; 30th March 2014 at 10:11 AM. Reason: problem solved
31st March 2014, 04:12 PM   |  #2  
Senior Member
Thanks Meter: 69
 
356 posts
Join Date:Joined: Oct 2010
Quote:
Originally Posted by miloslavc

Hello,i recently got Note 8.0 N5100 with official 4.2.2 and i decided to root it. I used CF-Auto-Root and followed instructions, downloaded newest drivers and everything went well in odin 3.07 but after odin finished i got stuck wirh samsung galaxy note logo and nothing happens now.
what shall i do now, can anybody please help me!!!!!!!

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Problem solved. I exidently when i was using search in cf auto root website downloaded wrong cf file for p5100 instead of n5100.

Your not the only one who had this problem... I which the mod would shut down the thread pushing rooting via flashing.

Too many newbies are having issues flashing.

I recommend saveroot.zip. It leaves your device's counter untouched. Also it is 100% safe.

Now what to do with your device since it is stuck at the Samsung logo.

You can do what I do for stuck screens. Power on, and hold only the up volume key. Keep it held until boot screen is finished.

If that does not work, go into recovery and clear cache and reboot.

If none of the options work, you may have flashed with an incompatible file, there are three versions and only one is specific to your device. you can try re-flashing with a good file.
18th November 2014, 06:43 AM   |  #3  
Senior Member
Flag Nevada
Thanks Meter: 33
 
384 posts
Join Date:Joined: Mar 2012
More
saveroot
Hello,

I am having a heck of a time finding this. Would you please point me in the right direction?

Thx!


Quote:
Originally Posted by gooberdude

Your not the only one who had this problem... I which the mod would shut down the thread pushing rooting via flashing.

Too many newbies are having issues flashing.

I recommend saveroot.zip. It leaves your device's counter untouched. Also it is 100% safe.

Now what to do with your device since it is stuck at the Samsung logo.

You can do what I do for stuck screens. Power on, and hold only the up volume key. Keep it held until boot screen is finished.

If that does not work, go into recovery and clear cache and reboot.

If none of the options work, you may have flashed with an incompatible file, there are three versions and only one is specific to your device. you can try re-flashing with a good file.

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes