Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

SCH-530U d2usc. help or advice?

OP ThePhill

30th March 2014, 02:59 AM   |  #1  
OP Junior Member
Thanks Meter: 0
 
4 posts
Join Date:Joined: Jan 2013
So here's what I did: I wanted to clear some space and start from scratch on my S3 (d2usc), so I wiped and used odin to go back to the stock 4.1 firmware. I updated OTA to 4.3 then I flashed CWM touch. From recovery I flashed SuperSU and the most recent CM11 nightly along with gapps. It was running perfect at this point. I made a backup and that's when I decided I was pro enough to flash a custom kernel in recovery. Specifically this one. Which I'm sure is a nice kernel, if only it was made for my device *facepalm* So now it won't turn on. No download mode or recovery. When I plug in to my PC Windows doesn't recognize it. I can hear the "plugged in" sound, but it sounds sort of laggy. When I unplug it I get the normal "unplugged" sound, but the screen stays black no matter what. I also get a red LED when plugged in without a battery. I'm thinking my only option might be a USB jig, but I really have no idea if that will work in this situation. So what do you guys think? Is it salvageable?
30th March 2014, 04:27 PM   |  #2  
audit13's Avatar
Senior Member
Toronto
Thanks Meter: 1,000
 
3,147 posts
Join Date:Joined: Jun 2012
More
You could try a jig or look for a debricking guide for your phone. As a last resort, a jtag service may be needed.
The Following User Says Thank You to audit13 For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes