Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,736,733 Members 54,339 Now Online
XDA Developers Android and Mobile Development Forum

[Q] I747 S3 Download Mode - No Normal Boot

Tip us?
 
P. Dexter85
Old
#1  
P. Dexter85's Avatar
Member - OP
Thanks Meter 6
Posts: 81
Join Date: Feb 2011
Location: Oakland Park
Exclamation [Q] I747 S3 Download Mode - No Normal Boot

HAS ANYONE ELSE HAVE THIS ISSUE!!!

WON'T ALLOW BOOT INTO RECOVERY!!

Tired to flash the Wicked ROM for the I747 S3 model and right after wiping and flashing the ROM, the device shut off. Once I went to wipe and restore because clearly this ROM didn't work. I ended up with:

Could not do normal boot.
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enabled
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 2

I'm not doing this for warranty purposes, I'm just trying to revive my phone whether it be with or without root access.
Attached Thumbnails
Click image for larger version

Name:	20140402_094639[1].jpg
Views:	397
Size:	243.9 KB
ID:	2664365   Click image for larger version

Name:	20140402_094631[1].jpg
Views:	388
Size:	247.5 KB
ID:	2664366  
 
audit13
Old
#2  
audit13's Avatar
Senior Member
Thanks Meter 349
Posts: 2,167
Join Date: Jun 2012
Since you can get into download, try installing a custom recovery via Odin such as Philz Touch and then try to get into recovery. Maybe you existing recovery has been corrupted.
The Following User Says Thank You to audit13 For This Useful Post: [ Click to Expand ]
 
P. Dexter85
Old
#3  
P. Dexter85's Avatar
Member - OP
Thanks Meter 6
Posts: 81
Join Date: Feb 2011
Location: Oakland Park
Perfect. Got it up and running. Thanks

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 
codemonkey98
Old
#4  
codemonkey98's Avatar
Senior Member
Thanks Meter 56
Posts: 309
Join Date: Nov 2013
Location: Pensacola, FL
Quote:
Originally Posted by P. Dexter85 View Post
Perfect. Got it up and running. Thanks

Sent from my SAMSUNG-SGH-I337 using Tapatalk
Remember, as long as you are able to boot either in download mode or even your bootloader, you're pretty much guaranteed to get your phone back up and running. Although lets say you cannot access both, then you'll need to JTAG your device which may be difficult depending on your skill set in that area.
Devices:
~~~~

Find my post helpful? Remember to click that button!
 
Maralex1520
Old
#5  
Junior Member
Thanks Meter 0
Posts: 8
Join Date: Jun 2014
Location: San Salvador
Default Canít access to Download Mode or Recovery Mode after bricking AT&T Galaxy S3 i744 4.3

Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 Click image for larger version

Name:	1.jpg
Views:	9
Size:	97.5 KB
ID:	2790296
Because the phone is in another country I couldnít update it by OTA to android 4.3

So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)

The S3 was not Root

I installed all the phone drivers in the computer

This is what I did: (http://forum.xda-developers.com/show...2&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time Click image for larger version

Name:	2.jpg
Views:	9
Size:	73.6 KB
ID:	2790297Click image for larger version

Name:	3.jpg
Views:	13
Size:	48.8 KB
ID:	2790298
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start Click image for larger version

Name:	4.jpg
Views:	10
Size:	156.1 KB
ID:	2790299

The installation seemed to go right, the program never showed anything weird. Click image for larger version

Name:	5.jpg
Views:	8
Size:	188.1 KB
ID:	2790300
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldnít install any driver, so I disconnected it of the computer.
I couldnít turn on the phone , I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.

I started to search forums that talk about restart or turn on a brick AT&T S3 i747

I found one (http://forum.xda-developers.com/show....php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program ďWin32DiskImagerĒ to put the image inside of a micro SD to make the phone turn on,

I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.Click image for larger version

Name:	6.jpg
Views:	9
Size:	97.5 KB
ID:	2790301
I can use it normally so far.

But the problem is that I canít turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside donít show any sign of life

When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)

Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?

And if I could access to download mode what should I do next ?

The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(90 5 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes