FORUMS

Which Lockscreen Security Type Do You Use?

From pattern locks to the controversial face unlock, there are a number of different ways you … more

Xposed 3.0 Alpha 3 Released

A new alpha for the Xposed framework is out and brings several bug fixes. You’ll only need to flash … more

XDA Recap: This Week In Android (Apr 18 – 25)

Here in the digital XDA newsroom, we spend our days pouring over an average of … more

Sunday Debate: Custom ROMs vs. Modular Tweaks

Join us in a fun Sunday Debate on Mods and ROMs. Come with your opinions and feel free to … more
Thread Deleted Subscribe to Thread Email Thread

[Step By Step] GPS Fix (external ANTENNA) (pics attached)

Prev Previous Post   Next Post Next
8th April 2014, 01:33 PM |#1  
OP Member
Flag Alexandria
Thanks Meter: 12
 
More
in this thread i will explain how to make external GPS antenna for our OP without epensice costs (it costs me less than a dollar )

im not responsible for damaging your phone if u try to follow this !!!

Materials:
*screwdriver (i used 3mm but 1.5 mm is optimum) (i bought 2 screws flat and crossed for 0.5 $)
*a piece of copper wire about 10 - 12 cm and thin diameter (i used a wire of my old damaged mouse) (cost nothing)


Procedures:

1-take of the 7 screws at the back.

2-with a flat screw ..... at the top right sider (at mp3 jack) enter the screw and rotate slowly and carefully and the plastic back will open clip by clip. (try to be careful cuz of weak materials). (after taking off the back cover take care of volume rocker button and lock button as the may fall and lost!!!!!) (take the battery off to avoid short circuits)

3-locate the GPS antenna terminal at the plastic back and at the motherboard (ignor the ground terminal)







4-at the plastic cover ...... put a piece of adhesive tape on antenna to be sure of its isolation



5-on the motherboard ....... put a piece of plastic adhesive tape on the marked area and pass the copper wire from the rubber piece as in the pic and make th wire get out at the area directly near the antenna (cuz it's opened at the back over)











6-reture the buttons in place and the back cover and tight the screws

7-cover the metallic areas over the SIM card and SD card and screw median to the camera by plastic tape to prevent touching of wires.



8-Now ............ u got the antenna >>>>>>>>>>>>u can bend it behind the battery cover but it won't make reception better as u thought >>>>>>>> OR >>>>>>>>>>>>> when u need it just take off the battery cover and get it out !!!!












http://youtu.be/KJ60A2bt6Sw
Last edited by hardyboy_samy; 9th April 2014 at 02:33 AM.
The Following 6 Users Say Thank You to hardyboy_samy For This Useful Post: [ View ]
Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes