Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,740,721 Members 51,936 Now Online
XDA Developers Android and Mobile Development Forum

[Q] Moto G corrupt bootloader USB dev qhsusb_bulk

Tip us?
 
sideout0000
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 4
Join Date: Jan 2013
Default [Q] Moto G corrupt bootloader USB dev qhsusb_bulk

My phone locked up. Was running CM11 April Snapshot release. Now it shows up as USB device "qhsusb_bulk" I've followed the instructions from the thread http://forum.xda-developers.com/show....php?t=2623587 but I get the following error.
Code:
Select Code
flashing singleimage
Target LOG: Open multi failed, unknown error
Target ERROR: 7 - Open multi failed, unknown error
Failed to open multi image, status = 7
FAILED (sdl-transfer-image:send-image:sdl-open-multi:error opening multi image)
How can I get past this problem or what does the error mean?
 
Boss442
Old
#2  
Boss442's Avatar
Senior Member
Thanks Meter 386
Posts: 284
Join Date: Jul 2012
Location: Mar Del Plata
Check USB cable..

Enviado desde mi Moto G mediante Tapatalk
 
sideout0000
Old
#3  
Junior Member - OP
Thanks Meter 0
Posts: 4
Join Date: Jan 2013
Cable OK. Output from new cable follows.
Code:
Select Code
greeting device for command mode
OKAY [  0.582s]
identifying device
...serial = 0x25452DA
...chip-id = 0x801 (MSM8626)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [  0.010s]
finding files
...programmer = programmer_8626.mbn
...singleimage = singleimage_8626.bin
OKAY [  0.013s]
validating files
OKAY [  0.001s]
switching to download mode
OKAY [  0.002s]
greeting device for image downloading
OKAY [  0.003s]
sending programmer
OKAY [  0.013s]
flashing singleimage
Target LOG: Open multi failed, unknown error
Target ERROR: 7 - Open multi failed, unknown error
Failed to open multi image, status = 7
FAILED (sdl-transfer-image:send-image:sdl-open-multi:error opening multi image)
Press any key to continue . . .
 
sideout0000
Old
#4  
Junior Member - OP
Thanks Meter 0
Posts: 4
Join Date: Jan 2013
Cable OK. Below isDebug Output after flash singleimage_8626 is complete.

Code:
Select Code
D - 00000230  00 00 00 20 00 01 00 00  7e                       |... ....~       |
D - Setting security mode
D - Dumping 6 bytes written
D - 00000000  7e 17 00 00 00 7e                                 |~....~          |
D - Dumping 5 bytes read
D - 00000000  7e 18 00 00 7e                                    |~...~           |
D - Opening device for flashing
D - Dumping 6 bytes written
D - 00000000  7e 1b 21 00 00 7e                                 |~.!..~          |
D - Dumping 38 bytes read
D - 00000000  7e 0e 4f 70 65 6e 20 6d  75 6c 74 69 20 66 61 69  |~.Open multi fai|
D - 00000010  6c 65 64 2c 20 75 6e 6b  6e 6f 77 6e 20 65 72 72  |led, unknown err|
D - 00000020  6f 72 0a 00 00 7e                                 |or...~          |
I - Target LOG: Open multi failed, unknown error
D - Dumping 41 bytes read
D - 00000000  7e 0d 07 00 00 00 4f 70  65 6e 20 6d 75 6c 74 69  |~.....Open multi|
D - 00000010  20 66 61 69 6c 65 64 2c  20 75 6e 6b 6e 6f 77 6e  | failed, unknown|
D - 00000020  20 65 72 72 6f 72 00 00  7e                       | error..~       |
I - Target ERROR: 7 - Open multi failed, unknown error
E - Failed to open multi image, status = 7
D - \\.\COM23 closed
FAILED (sdl-transfer-image:send-image:sdl-open-multi:error opening multi image)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes