Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,738,692 Members 40,207 Now Online
XDA Developers Android and Mobile Development Forum

Archos 101 g9 8gb & Huawei modem E173u-1[No driver found]

Tip us?
 
samirulla
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Apr 2014
Default Archos 101 g9 8gb & Huawei modem E173u-1[No driver found]

Hi, I am having issues with a Huawei modem E173u-1 on my tablet Archos 101 g9 8gb
driver not found.
Can you help me, pls?



USB_ModeSwitch log from Wed Apr 09 17:50:44 PKT 2014

Raw args from udev: 1-1/1-1:1.0

Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer HUAWEI
product HUAWEI Mobile
serial
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/12d1.14fe
! matched. Reading config data
devList 1:
config: TargetVendor set to 12d1
config: TargetProduct set to 1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1

Logger is: /system/bin/log
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 2 -v 12d1 -p 14fe -f $cB

Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------

Reading long config from command line

* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor= 0x12d1
DefaultProduct= 0x14fe
TargetVendor= 0x12d1
TargetProduct= 0x1506
TargetClass= not set
TargetProductList=""

DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="5553424312345678000000000000001106 2000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set

InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled


Use given bus/device number: 001/002 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)

USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Could not reset endpoint (probably harmless): -34
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -6
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.

ok:busdev
--------------------------------
(end of usb_modeswitch output)

Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (4 sec.) ...
Waiting for device file system (5 sec.) ...
Waiting for device file system (6 sec.) ...
Waiting for device file system (7 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 12d1:1506 (HUAWEI: HUAWEI Mobile)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /sbin/insmod
Trying to find and install main driver module "option"

Trying to find module "option"
Loading support module /lib/modules/usb_wwan.ko
Error: insmod: cannot insert '/lib/modules/usb_wwan.ko': Invalid module format (-1): Exec

format error
Loading main driver module "option"
Error: insmod: cannot insert '/lib/modules/option.ko': Invalid module format (-1): Exec

format error
Falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding seems to have failed

All done, exiting

please answer!!!
 
samirulla
Old
#2  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Apr 2014
i'm solved the problem by replacing the nucleus
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes