Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,736,064 Members 41,649 Now Online
XDA Developers Android and Mobile Development Forum

[FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers

Tip us?
 
tuxboy
Old
(Last edited by tuxboy; 23rd April 2014 at 02:30 AM.)
#1  
tuxboy's Avatar
Member - OP
Thanks Meter 112
Posts: 40
Join Date: Dec 2013
Location: Dhaka

 
DONATE TO ME
Plug [FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers

If you somehow brick your WALTON Primo S2 device during development or testing out some crazy stuff, this firmware should come in handy. Even if the bootloader gets killed, your phone can be recovered using this method. Or you can just flash stock firmware when you want it.



Downloads
INSTRUCTIONS (IF NOT BRICKED)
Quote:
  1. Download and Extract the ZIP archive linked above.
  2. Browse to the Primo S2 Official Firmware/Drivers folder. Double-click on GN_QC_EN_Driver_V1.1.0.0.exe to install the driver.
  3. Connect your phone via USB and make sure USB Debugging is turned on, on your phone.
  4. Browse to the Primo S2 Official Firmware/Software folder and extract the file PrimoS2_0402_T5281.7z. (You need 7zip installed for this)
  5. Extract the file Primo S2 Official Firmware/Flash tools/GNQC_DownLoadV1.6.4.0_EN.rar.
  6. Double click on the GNQC_DownLoad.exe located inside the folder you just extracted. You should see a window like below. (click the image to see larger image)
    Click image for larger version

Name:	0.png
Views:	216
Size:	57.4 KB
ID:	2689033
  7. Now click on AP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281
  8. Then click on BP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281/bp_image
  9. Set DL mode to General download. Make sure the "Backup or Restore QCN" checkbox is unchecked.
    Click image for larger version

Name:	1.png
Views:	146
Size:	60.8 KB
ID:	2689034
  10. Now click the DownLoad button, the download process should start.
    Click image for larger version

Name:	2.png
Views:	112
Size:	65.0 KB
ID:	2689035
  11. After a while, the flashing should complete and you will see a confirmation message. Disconnect the phone, pull out the battery, put it in again and push the power button!
    Click image for larger version

Name:	3.png
Views:	103
Size:	49.7 KB
ID:	2689036
Instructions (IF Bricked)
Quote:
  1. Download and Extract the ZIP archive linked above.
  2. Browse to the Primo S2 Official Firmware/Drivers folder. Double-click on GN_QC_EN_Driver_V1.1.0.0.exe to install the driver.
  3. If your device is bricked, nothing except the lights of the hardware buttons should light up. So, make sure it is bricked, switch on your phone and connect it via USB cable.
  4. Browse to the Primo S2 Official Firmware/Software folder and extract the file PrimoS2_0402_T5281.7z. (You need 7zip installed for this)
  5. Extract the file Primo S2 Official Firmware/Flash tools/GNQC_DownLoadV1.6.4.0_EN.rar.
  6. Double click on the GNQC_DownLoad.exe located inside the folder you just extracted. You should see a window like below. (click the image to see larger image)
    Click image for larger version

Name:	0.png
Views:	216
Size:	57.4 KB
ID:	2689033
  7. Now click on AP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281
  8. Then click on BP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281/bp_image
  9. Set DL mode to General download. Make sure the "Backup or Restore QCN" checkbox is unchecked.
    Click image for larger version

Name:	1.png
Views:	146
Size:	60.8 KB
ID:	2689034
  10. Now click the DownLoad button, the download process should start.
    Click image for larger version

Name:	2.png
Views:	112
Size:	65.0 KB
ID:	2689035
  11. After a while, the flashing should complete and you will see a confirmation message. Disconnect the phone, pull out the battery, put it in again and push the power button!
    Click image for larger version

Name:	3.png
Views:	103
Size:	49.7 KB
ID:	2689036
Credits
  • Imran Imu, Walton Mobile
Attached Thumbnails
Click image for larger version

Name:	Untitled.png
Views:	61
Size:	56.3 KB
ID:	2689047  
The Following 11 Users Say Thank You to tuxboy For This Useful Post: [ Click to Expand ]
 
esarve
Old
#2  
esarve's Avatar
Senior Member
Thanks Meter 20
Posts: 162
Join Date: Jun 2013
Location: Munshiganj

 
DONATE TO ME
নিজে বানাইছো নাকি ফ্ল্যাশ টুল টা?
 
tuxboy
Old
#3  
tuxboy's Avatar
Member - OP
Thanks Meter 112
Posts: 40
Join Date: Dec 2013
Location: Dhaka

 
DONATE TO ME
Quote:
Originally Posted by esarve View Post
নিজে বানাইছো নাকি ফ্ল্যাশ টুল টা?
No! Made by Gionee.
 
OdSazib
Old
#4  
OdSazib's Avatar
Member
Thanks Meter 87
Posts: 65
Join Date: Oct 2013
Location: Dhaka

 
DONATE TO ME
Quote:
Originally Posted by tuxboy View Post
If you somehow brick your WALTON Primo S2 device during development or testing out some crazy stuff, this firmware should come in handy. Even if the bootloader gets killed, your phone can be recovered using this method. (If nothing except the keypad lights turn on, then you killed the bootloader). So, let's see how we can revive a dead Primo S2.



Downloads
Instructions
  1. Download and Extract the ZIP archive linked above.
  2. Browse to the Primo S2 Official Firmware/Drivers folder. Double-click on GN_QC_EN_Driver_V1.1.0.0.exe to install the driver.
  3. If your device is bricked, nothing except the lights of the hardware buttons should light up. So, make sure it is bricked, switch on your phone and connect it via USB cable.
  4. Browse to the Primo S2 Official Firmware/Software folder and extract the file PrimoS2_0402_T5281.7z. (You need 7zip installed for this)
  5. Extract the file Primo S2 Official Firmware/Flash tools/GNQC_DownLoadV1.6.4.0_EN.rar.
  6. Double click on the GNQC_DownLoad.exe located inside the folder you just extracted. You should see a window like below. (click the image to see larger image)
    Attachment 2689033
  7. Now click on AP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281
  8. Then click on BP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281/bp_image
  9. Set DL mode to General download. Make sure the "Backup or Restore QCN" checkbox is unchecked.
    Attachment 2689034
  10. Now click the DownLoad button, the download process should start.
    Attachment 2689035
  11. After a while, the flashing should complete and you will see a confirmation message. Disconnect the phone, pull out the battery, put it in again and push the power button!
    Attachment 2689036

Credits
  • Imran Imu, Walton Mobile
Thanks Ani vai for your awesom writing

Grateful to WaltonBD, Imran vai
Current Device: Walton Primo S2
SOC: Qualcomm Sanpdragon 400 MSM8228
Root Access: Yes
***********************************************
Talk is cheap, Press on my post if you find Informative

Some of My Recent Works
The Following 3 Users Say Thank You to OdSazib For This Useful Post: [ Click to Expand ]
Tags
primo s2, stock rom, walton
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes