View Poll Results: Was this guide helpful?
Yes 17 94.44%
No 1 5.56%
Voters: 18. You may not vote on this poll

Post Reply

[GUIDE V1.6][ROOT][4.2.2 TO 4.4] XT1080/M (Requires Rooted 4.2.2) 01/20/14

12th April 2014, 08:01 AM   |  #101  
hexto's Avatar
Senior Member
Flag Middletown, CT
Thanks Meter: 62
 
673 posts
Join Date:Joined: Aug 2008
More
Quote:
Originally Posted by NWKENT

Have you gentleman gotten the answers you seek.?

Sent from my 4.3_14.14.14
(Unlocked) XT1028 Moto G
http://waynekent.com/page6.html

I'm following your instructions from the link you posted and when I test c:\XT1080JB>adb in CMD I get the quick scroll and everything seems to work but when I type in c:\XT1080JB get "c:\XT1080JB is not recognized as an internal or external command, operable program or batch file"

I seem to get some sort of error in CMD with any root method I try. I am on 4.2.2 v12.7.7 so I should be able to root but between my PC giving a hard time and my lack of knowledge to get around it I can't seem to make any progress

XT1080jb is extracted to c:\
Last edited by hexto; 12th April 2014 at 08:03 AM.
12th April 2014, 11:42 AM   |  #102  
NWKENT's Avatar
Senior Member
Thanks Meter: 478
 
1,074 posts
Join Date:Joined: Dec 2010
Quote:
Originally Posted by hexto

I'm following your instructions from the link you posted and when I test c:\XT1080JB>adb in CMD I get the quick scroll and everything seems to work but when I type in c:\XT1080JB get "c:\XT1080JB is not recognized as an internal or external command, operable program or batch file"

I seem to get some sort of error in CMD with any root method I try. I am on 4.2.2 v12.7.7 so I should be able to root but between my PC giving a hard time and my lack of knowledge to get around it I can't seem to make any progress

XT1080jb is extracted to c:\

Sir..you must be on JB 4.2.2_12.15.15 in order to start the bundle..the FXZ one can flash to 4.2.2_12.15.15 from 4.2.2_12.7.7 is included with my bundle..

Please read the instuction sheet..this fact will be obvious..

My bundle has been tested many times in WinXP Pro and Win7 Pro..reboot your computer may be needed..if the screen scrolls once you enter the commands, then this proves ( adb.exe ) is functioning as it should.

Sent from my 4.3_14.14.14
(Unlocked) XT1028 Moto G
http://waynekent.com/page6.html
Last edited by NWKENT; 12th April 2014 at 11:48 AM.
19th April 2014, 05:43 AM   |  #103  
hexto's Avatar
Senior Member
Flag Middletown, CT
Thanks Meter: 62
 
673 posts
Join Date:Joined: Aug 2008
More
Quote:
Originally Posted by NWKENT

Sir..you must be on JB 4.2.2_12.15.15 in order to start the bundle..the FXZ one can flash to 4.2.2_12.15.15 from 4.2.2_12.7.7 is included with my bundle..

Please read the instuction sheet..this fact will be obvious..

My bundle has been tested many times in WinXP Pro and Win7 Pro..reboot your computer may be needed..if the screen scrolls once you enter the commands, then this proves ( adb.exe ) is functioning as it should.

Sent from my 4.3_14.14.14
(Unlocked) XT1028 Moto G
http://waynekent.com/page6.html

I just accepted the 12.15.15 update and now my phone is on bootloop Gonna hit up the store tomorrow for a replacement. Hope I get one that isn't updated to KitKat.

I got spoiled with my GNex being so easy to root and flash ROM's.

I can get into the bootloader but normal, recovery, and factory all bootloop. Is there anything I can do to fully wipe?
Last edited by hexto; 19th April 2014 at 05:51 AM.
21st April 2014, 06:28 PM   |  #104  
Member
Chicago
Thanks Meter: 9
 
59 posts
Join Date:Joined: Oct 2013
More
I used this amazing guide to upgrade from 4.2.2 to 4.4 and I'm very thankful for it. I only have one problem now.

When I "adb shell getprop ro.boot.write_protect" it is always coming back as 0. I can't figure out a way to turn system write protection back on. Need that 0 to be a 1. Can anyone be of some assistance?

Rebooting doesn't work.
21st April 2014, 10:08 PM   |  #105  
Senior Member
Thanks Meter: 20
 
232 posts
Join Date:Joined: Dec 2011
Quote:
Originally Posted by SupremeOverlord

I used this amazing guide to upgrade from 4.2.2 to 4.4 and I'm very thankful for it. I only have one problem now.

When I "adb shell getprop ro.boot.write_protect" it is always coming back as 0. I can't figure out a way to turn system write protection back on. Need that 0 to be a 1. Can anyone be of some assistance?

Rebooting doesn't work.

if you used wpnomo, then i don't think there is a way you can turn write protection back on
21st April 2014, 10:22 PM   |  #106  
Member
Chicago
Thanks Meter: 9
 
59 posts
Join Date:Joined: Oct 2013
More
Quote:
Originally Posted by mistermojorizin

if you used wpnomo, then i don't think there is a way you can turn write protection back on

I did use that. Sometimes when opening an app it crashes my phone and was thinking that might be the reason. Also my alarm clock doesn't go off when I leave it on my Qi Charger overnight. Strange things. Thanks for your reply.
21st April 2014, 10:23 PM   |  #107  
Topsnake's Avatar
OP Senior Member
Thanks Meter: 488
 
929 posts
Join Date:Joined: Jan 2011
Donate to Me
More
Quote:
Originally Posted by SupremeOverlord

I did use that. Sometimes when opening an app it crashes my phone and was thinking that might be the reason. Also my alarm clock doesn't go off when I leave it on my Qi Charger overnight. Strange things. Thanks for your reply.

Those wouldn't be related to wp

Droid Maxx "Developer Edition"

The Following User Says Thank You to Topsnake For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools
Display Modes


Top Threads in Droid Ultra Original Android Development by ThreadRank