We would have to own a pair to make a profile and as far is the US is concerned those aren't available.I am using these ear plugs
http://www.nokia.com/global/products/accessory/wh-510/
can somebody suggest some good Profile settings
We would have to own a pair to make a profile and as far is the US is concerned those aren't available.I am using these ear plugs
http://www.nokia.com/global/products/accessory/wh-510/
can somebody suggest some good Profile settings
1. Master Power: ✔
2. Viper DDC: √
Listening Device: Skullcandy HESH2
3. Spectrum Extension: √ (optional )
Strength: 0.5
4. Headphone Surround +: √( optional )
Effect Level : Level 2
5. Cure Tech+: √
Select Binaural Level : Extreme
The Viper DDC for my headphones are perfectly done so all that was needed is listed above. The bass thumps when playing bass heavy tracks. Rock songs and songs with a booming sound now have a wider soundstage. The highs have little to no change at all which is good since these headphones already have solid highs for clear vocals. Feel free to change the DDC since it is meant for the HESH 2 and will only sound good with similar sounding headphones.
You're welcome and I don't have an expensive pair either. Unless you think $60 is expensive which is the retail price of the Hesh 2. The Aviators from the same company cost more ($150) but still cheaper than Beats.Excellent! though i don't have an expensive headset (Panasonic RP-HJE120). Luckily it's there in the DDC list. With the above profile. I feel the true realistic sound of every track from the headset
DDC is everything. You observation & expertise is very true. Please keep experimenting & share your finding here
thank you
You're asking the wrong people. You have to ask the developer and/or the thread maintainer about it.
1. Spectrum extension doesn't do anything for lossless audio(FLAC and ALAC).i just noticed that the DDC for the stock s3 earphones lacks certain power and curve., so i reverted back using zhuang's profile for earphones but modified some settings in dynamic system to slightly enhance further the bass since this particular earphones lacks bass and used SPL_goldmike impulse w/ flair irs, (since it lacks in the vocals) . and voila it matches the sound quality of sound magic e10 (i used to have that earphone b4 i decided to sell it to my friend.)
question though does spectrum extension matters for flac? since i think spectrum extension is for mp3 encoded songs?
which equalizer would u guys prefer, is it in the FX or Xhifi? or i think they're pretty much the same?
1. Spectrum extension doesn't do anything for lossless audio(FLAC and ALAC).
2. Those apps do different things as stated in the apps thread so it is foolish to compare the two. One adds effects while the other is an audio restoration app.
In a way you can but once you use Viper DDC then there is no need for either eq settings and the XHIFI app.what i mean is the firequalizer settings in those two, so u mean i can use those two equalizers in tandem since they are different in effects?
HEADSET [Vsonic VSD1S]
1. Master Power: ✔
2. Playback Gain Control: ✔
- Effect Strength: Slight
- Max Gain: 6x
- Max Output: -3.0 dB
3. FIR Equalizer: ✔
- Preset: Acoustic
4. Convolver: ✔
- Impulse Response: Sanyo Bass Xpander (Z-Edition)
- Cross Channel: 5%
5. Field Surround: ✘
6. Differential Surround: ✘
7. Headphone Surround +: ✔
- Effect Quality: Level 2
8. Reverberation: ✘
- Room Size: 25m2
- Sound Field: 5m
- Damping Factor: 0 Percent
- Wet Signal: 0 Percent
- Dry Signal: 50 Percent
9. Dynamic System: ✔
- Listening Device: High-end headphone(v2)
- Dynamic Bass: 16 Percent
- Tube Simulator(6N1J): ✘
10. Fidelity Control
- ViPER Bass: ✔
- Bass Mode: Natural bass
- Bass Frequency: 66 Hz
- Select Bass Boost: 6.0 dB
- ViPER Clarity: ✔
- Clarity Mode: XHiFi
- Select Clarity: 8.0 dB
11. Auditory System Protection Cure Tech+: ✔
- Binaural Level: Slight
12. Master Gate(Limiter)
- Ouput Gain: 2.9 dB
- Channel Pan: 0.5:0.5
- Limit Threshold: -1.0dB
In a way you can but once you use Viper DDC then there is no need for either eq settings and the XHIFI app.
Thanks! I have the same headset, what type of music is this preset for and where did you get the irs?
Hi,
lately I made a few changes to the settings providing a more natural sound. IRS can be found for free in the ZhuHang's thread - you can download directly from here (via MediaFire).
Effect: Sanyo Bass Xpander
Environment: Sanyo MCD-ZX570M
Updated Date: 30 January 2014
Compatible with: ViPER4Android FX v2.2.0.2 or higher, ViPER4Windows v1.0.1 or higher
Headset: Vsonic VSD1S
Master Power: ✔
Playback Gain Control: ✔
- Effect Strength: Slight
- Max Gain: 4x
- Max Output: -3.0 dB
ViPER-DDC ✘ (ViPER don't provide DDC for VSD1S, so I've found Shure SE846 has pretty similar tweaks, but it's not strictly necessary; it's up to you)
- Listening Device: SHURE - SE846
FIREqualizer: ✘ (I change often this setting, acoustic is great for soft-rock music, progressive, female vocals, torch songs etc but for all other genres I leave it disabled)
- Preset: Acoustic
Spectrum Extension ✔
Strenght: 0.3
Convolver: ✔
- Impulse Response: Sanyo Bass Xpander (Z-Edition)
- Cross Channel: 5%
Field Surround: ✘
Differential Surround: ✘
Headphone Surround +: ✔
- Effect Quality: Level 1
Reverberation: ✘
Dynamic System: ✔
- Listening Device: Common Earphone(v2)
- Dynamic Bass: 18 Percent
Tube Simulator(6N1J): ✘
Fidelity Control
- ViPER Bass: ✔
- Bass Mode: Natural bass
- Bass Frequency: 66 Hz
- Select Bass Boost: 8.0 dB
- ViPER Clarity: ✔
- Clarity Mode: XHiFi
- Select Clarity: 3.5 dB
Auditory System Protection Cure Tech+: ✘
Master Gate(Limiter)
- Ouput Gain: 2.3 dB
- Channel Pan: 0.5:0.5
- Limit Threshold: -1.0dB
i just noticed that the DDC for the stock s3 earphones lacks certain power and curve., so i reverted back using zhuang's profile for earphones but modified some settings in dynamic system to slightly enhance further the bass since this particular earphones lacks bass and used SPL_goldmike impulse w/ flair irs, (since it lacks in the vocals) . and voila it matches the sound quality of sound magic e10 (i used to have that earphone b4 i decided to sell it to my friend.)
question though does spectrum extension matters for flac? since i think spectrum extension is for mp3 encoded songs?
which equalizer would u guys prefer, is it in the FX or Xhifi? or i think they're pretty much the same?
Dr.Ronak's Personal V4A Profile
:fingers-crossed:My basic goal to provide such a Music Profile which not only you love to listen through Headphones but also through Speaker as well!:fingers-crossed:
My Profile: PATRON+
It matters a lot which headphone you use,Since this is completely off-topic to choose something between Highend headphone to some Low quality ones,I've used Samsung galaxy Note 2 headphones. But i think you will love the Profile.
Headphones/In-the-ear Earphones
FX:
1. MASTER POWER:
(i) V4A-FX is powered on: ✔
(ii) Force Enable V4A
2. PLAYBACK CONTROL GAIN:
(i) PlaybackAGC is enabled: ✔
(ii) Select Effect Strength: Slight/Moderate
(iii) Max Gain: 4x
(iv) Max Output: -3.0dB
3. SPECTRUM EXTENSION:
(i) Spectrum extension is enabled: ✔
(ii) Strength: 0.3
4. FIREQUALIZER:
(i) FIREqualizer is enabled: ✔
(ii) Select Preset: Custom(See Attachment)
5. CONVOLVER:
(i) Convolver is enabled: ✔
(ii) Impulse Response: Sony Xperia ClearAudio+.irs
(iii) Cross Chanel: 5Percent
6. FIELD SURROUND: ✘
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
7. DIFFERENTIAL SURROUND: ✘
(i) Select Delay Time:
8. HEADPHONE SURROUND +: ✘
(i) Select Effect Quality:
9. REVERBERATION: ✘
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
10. DYNAMIC SYSTEM:
Dynamic system is enabled: ✔
(i) Select Listening Device: Common Earphone(v2)
(ii) Select Dynamic Bass: 18 Percent
11. TUBE SIMULATOR (6N1J): ✘
12. FIDELITY CONTROL:
(i) Enable ViPER Bass: ✔
Select Bass Mode: Natural Bass
Select Bass Frequency: 66Hz
Select Bass Boost: 8.0dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Natural
Select Clarity: 8.0dB
13. AUDITORY SYSTEM PROTECTION:
(i) Cure Tech+ is enabled: ✔
(ii) Select Binaural Level: Moderate
14. MASTER GATE (Limiter)
(i) Output Gain: 2.3dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: -1.0dB
Phone Speaker
FX:
1. MASTER POWER
(i) V4A-SpeakerFX is powered on: ✔
(ii) Force Enable V4A
2. FIREQUALIZER
(i) FIREqualizer is enabled: ✔
(i) Select Preset: Custom
3. CONVOLVER
(i) Convolver is enabled: ✔
(ii) Impulse Response: HTC Beats Audio.irs
(iii) Cross Channel: 5 Percent
4. REVERBERATION: ✘
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
5. SPEAKER OPTIMIZATION:
(i) Speaker optimization is enabled: ✔
6. EXTRA LOUD:
(i) eXtra-Loud is enabled: ✔
(ii) Select Effect Strength: Slight
(iii) Max Gain: 3x
(iv) Main Output: -1.0dB
7.MASTER GATE(LIMITER):
(i) Output Gain: 1.6dB
(ii) Limit Threshold: -1.0dB
THANKS.
Is speaker equalizer profile the same as the headphone ones? Trying to give this a try
Sent from my LG-VS980 using Tapatalk
Sir,Headphone equalizer is more like crystal clear sound quality with clear deep bass effect with Moderate Auditory Protection. Whereas on Speaker you'll notice Clear Sound the way it should be.
Thanks.
sorry i was talking about the custom setting for firequalizer. There is only 1 picture of that. so i was wondering if it is for both headphones and the speaker settings.
See Personal Profiles below for a hint of what to do!FX:
1. MASTER POWER:
(ii) Force Enable V4A
2. PLAYBACK CONTROL GAIN:
(ii) Select Effect Strength:
(iii) Max Gain:
(iv) Max Output:
3. VIPER-DDC:
(ii) Listening Device:
4. SPECTRUM EXTENSION:
(ii) Strength:
5. FIREQUALIZER:
(ii) Select Preset:
6. CONVOLVER:
(ii) Impulse Response:
(iii) Cross Chanel
7. FIELD SURROUND:
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND:
(i) Select Delay Time:
9. HEADPHONE SURROUND +:
(i) Select Effect Quality:
10. REVERBERATION:
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM:
(i) Select Listening Device:
(ii) Select Dynamic Bass:
12. TUBE SIMULATOR (6N1J):
13. FIDELITY CONTROL:
(i) Enable ViPER Bass:
Select Bass Mode:
Select Bass Frequency:
Select Bass Boost:
(ii) Enable ViPER Clarity:
Select Clarity Mode:
Select Clarity:
14. AUDITORY SYSTEM PROTECTION:
(ii) Select Binaural Level:
15. MASTER GATE (Limiter):
(i) Output Gain:
(ii) Channel Pan:
(iii) Limit Threshold:
FX:
1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength: Slight
(iii) Max Gain: 4x
(iv) Max Output: 0 dB
3. VIPER-DDC: ✘
(ii) Listening Device:
4. SPECTRUM EXTENSION: ✘
(ii) Strength:
5. FIREQUALIZER: ✔
(ii) Select Preset: Custom
Custom Equalixer FX:
+3.1, +2.5, +1.5, +0.8, +1.3, +2.0, +1.6, +1.1, +2.2, +2.8
6. CONVOLVER: ✘
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND: ✘
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND: ✘
(i) Select Delay Time:
9. HEADPHONE SURROUND +:✘
(i) Select Effect Quality:
10. REVERBERATION: ✘
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✔
(i) Select Listening Device: Extreme Headphone (v2)
(ii) Select Dynamic Bass: 9 Percent
12. TUBE SIMULATOR (6N1J): ✘
13. FIDELITY CONTROL:✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 80 Hz
Select Bass Boost: 8.0 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 6.0 dB
14. AUDITORY SYSTEM PROTECTION: ✘
(ii) Select Binaural Level:
15. MASTER GATE (Limiter): ✔
(i) Output Gain: -6.0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB
FX:
1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength: Moderate
(iii) Max Gain: 2x
(iv) Max Output: 0 dB
3. VIPER-DDC: ✘
(ii) Listening Device:
4. SPECTRUM EXTENSION: ✘
(ii) Strength:
5. FIREQUALIZER: ✔
(ii) Select Preset: Custom
Custom Equalixer FX:
+3.0, +1.5, +1.0, +1.6, +1.4, +2.1, +2.9, +2.3, +3.8, +2.5
6. CONVOLVER: ✘
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND: ✘
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND: ✘
(i) Select Delay Time:
9. HEADPHONE SURROUND +:✘
(i) Select Effect Quality:
10. REVERBERATION: ✘
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✔
(i) Select Listening Device: Common Earphone (v2)
(ii) Select Dynamic Bass: 14 Percent
12. TUBE SIMULATOR (6N1J): ✘
13. FIDELITY CONTROL:✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 66 Hz
Select Bass Boost: 3.5 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 6.0 dB
14. AUDITORY SYSTEM PROTECTION: ✘
(ii) Select Binaural Level:
15. MASTER GATE (Limiter): ✔
(i) Output Gain: 0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB
FX:
1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength: Slight
(iii) Max Gain: 3x
(iv) Max Output: -1.0 dB
3. VIPER-DDC: ✘
(ii) Listening Device:
4. SPECTRUM EXTENSION: ✘
(ii) Strength:
5. FIREQUALIZER: ✔
(ii) Select Preset: Custom
Custom Equalixer FX:
+3.0, +1.9, +1.3, +1.6, +1.4, +2.2, +1.7, +0.7, +1.4, +0.8
6. CONVOLVER: ✘
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND: ✘
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND: ✘
(i) Select Delay Time:
9. HEADPHONE SURROUND +:✘
(i) Select Effect Quality:
10. REVERBERATION: ✘
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✔
(i) Select Listening Device: Common Earphone (v2)
(ii) Select Dynamic Bass: 1 Percent
12. TUBE SIMULATOR (6N1J): ✘
13. FIDELITY CONTROL:✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 66 Hz
Select Bass Boost: 8.0 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 6.0 dB
14. AUDITORY SYSTEM PROTECTION: ✔
(ii) Select Binaural Level: Slight
15. MASTER GATE (Limiter): ✔
(i) Output Gain: -3.0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: 0 dB
FX:
1. MASTER POWER: ✔
(ii) Force Enable V4A:
2. PLAYBACK CONTROL GAIN: ✘
(ii) Select Effect Strength:
(iii) Max Gain:
(iv) Max Output: 0 dB
3. VIPER-DDC: ✘
(ii) Listening Device:
4. SPECTRUM EXTENSION: ✘
(ii) Strength:
5. FIREQUALIZER: ✘
(ii) Select Preset: Custom
Custom Equalixer FX:
+1.9, +1.6, +2.1, +3.0, +3.2, +4.3, +3.9, +4.6, +5.0, +3.7
6. CONVOLVER: ✘
(ii) Impulse Response:
(iii) Cross Chanel:
7. FIELD SURROUND: ✘
(i) Select Field Surround Strength:
(ii) Select Mid Image Strength:
8. DIFFERENTIAL SURROUND: ✘
(i) Select Delay Time:
9. HEADPHONE SURROUND +:✘
(i) Select Effect Quality:
10. REVERBERATION: ✘
(i) Room Size:
(ii) Sound Field:
(iii) Damping Factor:
(iv) Wet Signal:
(v) Dry Signal:
11. DYNAMIC SYSTEM: ✘
(i) Select Listening Device:
(ii) Select Dynamic Bass:
12. TUBE SIMULATOR (6N1J): ✘
13. FIDELITY CONTROL:✔
(i) Enable ViPER Bass:✔
Select Bass Mode: Natural
Select Bass Frequency: 66 Hz
Select Bass Boost: 6.0 dB
(ii) Enable ViPER Clarity:✔
Select Clarity Mode: Natural
Select Clarity: 8.0 dB
14. AUDITORY SYSTEM PROTECTION: ✘
(ii) Select Binaural Level:
15. MASTER GATE (Limiter): ✔
(i) Output Gain: 0 dB
(ii) Channel Pan: 0.5 : 0.5
(iii) Limit Threshold: -1.9 dB
FX:
1. Master Power: ✔
2. Playback Gain Control: ✔
(ii) Select Effect Strength: Slight //Moderate
(iii) Max Gain: 4x //8x
(iv) Max Output: -1.9dB
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic*
4. Convolver: ✔
(ii) Impulse Response: Sony Xperia Clear Audio+ Try: SPL GoldMike Impulse w Flair//DBX//JoeMeek *PopEQ
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✘
(iv) Tube Simulator(6N1J): ✘
8. Auditory System Protection (Cure Tech+): ✔
(ii) Select Binaural Level: Moderate
XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✔
(ii) Select Preset: Vocal Boost**
4. Audio Reconstruction: ✔
(ii) Hi Clarity: 100**
(iii) Lo Contour: 70*
* Adjust to your desired bass level
** Adjust to your desired vocal level
* Adjust to your desired bass levelFX:
1. Master Power: ✔
2. Playback Gain Control: ✔
(ii) Select Effect Strength: Slight //Moderate
(iii) Max Gain: 4x //8x
(iv) Max Output: -1.9dB
3. FIR Equalizer: ✔
(ii) Select Preset: Acoustic*
4. Convolver: ✔
(ii) Impulse Response: Sony Xperia Clearbass Try: PopEQ
5. Field Surround: ✘
6. Reverberation: ✘
7. Dynamic System: ✔
(ii) Select Listening Device: Common Earphone(v2)*
(iii) Select Dynamic Bass: 100 Percent*
(iv) Tube Simulator(6N1J): ✘
8. Auditory System Protection (Cure Tech+): ✔
(ii) Select Binaural Level: Slight
XHIFI:
1. Master Power: ✔
2. Playback Gain Control: ✘
3. FIR Equalizer: ✔
(ii) Select Preset: Bass Boost**
4. Audio Reconstruction: ✔
(ii) Hi Clarity: 80**
(iii) Lo Contour: 100*
1. Find the Profile you would like to use.
2. Download V4A FX and/or XHiFi
3. Open either app and switch to the device the profile uses.
4. Enter all that you see on the profile.
5. Enjoy the amazing sound!