Post Reply

ODIN flash of PhilZ not working

OP BillyBob3

24th April 2014, 11:58 PM   |  #1  
OP Senior Member
Orlando
Thanks Meter: 48
 
244 posts
Join Date:Joined: Oct 2011
I am trying to install PhilZ recovery using ODIN, and its not taking. Was wondering if someone would throw a quick lifeline to me.

In ODIN, loaded philz_touch_6.26.6-klte.tar.md5 (MD5: 7C12BE66039B60731CA20DDECFF71A92) into the PDA slot
Only checked reboot and f.reset time
S5 into download mode by vol down+home+power
COM port shows up in ODIN
Start
Xfer's fine, and phone reboots normally
Shut down, and booted into the stock recovery instead of PhilZ
Repeated above but no check of reboot
At end of xfer, three-fingered again per instructions if you reboot into normal recovery, but once again, stock recovery.

Anything special about Sprint S5's?
25th April 2014, 12:20 AM   |  #2  
OP Senior Member
Orlando
Thanks Meter: 48
 
244 posts
Join Date:Joined: Oct 2011
Quote:
Originally Posted by BillyBob3

I am trying to install PhilZ recovery using ODIN, and its not taking. Was wondering if someone would throw a quick lifeline to me.

In ODIN, loaded philz_touch_6.26.6-klte.tar.md5 (MD5: 7C12BE66039B60731CA20DDECFF71A92) into the PDA slot
Only checked reboot and f.reset time
S5 into download mode by vol down+home+power
COM port shows up in ODIN
Start
Xfer's fine, and phone reboots normally
Shut down, and booted into the stock recovery instead of PhilZ
Repeated above but no check of reboot
At end of xfer, three-fingered again per instructions if you reboot into normal recovery, but once again, stock recovery.

Anything special about Sprint S5's?


EDIT: Figured it out. Its vol UP, not vol DOWN to get into recovery.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy S 5 Q&A, Help & Troubleshooting by ThreadRank