Post Reply

Galaxy Gear Neo on NATO strap

26th April 2014, 01:21 AM   |  #1  
OP Senior Member
Thanks Meter: 53
 
149 posts
Join Date:Joined: Oct 2010
http://youtu.be/kG6TNtzdr2M

Quick video on how to swap the straps. The Neo has speed pins so its easy to take off. However, since the spring bars are inside the strap, you need to buy 22mm spring bars.

I actually put the watch upside down on the video, but the process remains the same.

You'll also need to tool if you want to remove the strap later since they won't be speed pin (unless its NATO or ZULU straps)
28th April 2014, 05:04 AM   |  #2  
Senior Member
Thanks Meter: 64
 
324 posts
Join Date:Joined: Nov 2006
More
Quote:
Originally Posted by seoulbrova

http://youtu.be/kG6TNtzdr2M

Quick video on how to swap the straps. The Neo has speed pins so its easy to take off. However, since the spring bars are inside the strap, you need to buy 22mm spring bars.

I actually put the watch upside down on the video, but the process remains the same.

You'll also need to tool if you want to remove the strap later since they won't be speed pin (unless its NATO or ZULU straps)

I have a few NATO straps I was using w/ my Pebble. You mention the HRM doesn't work because of being covered by the strap, but also it should be noted that the strap needs to be loosened quite a bit or removed to mount the charging clip when you need to charge again.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools
Display Modes