Post Reply

[Q] Acer Iconia A501 - Frozen @ Acer Logo

1st May 2014, 10:15 AM   |  #21  
OP Junior Member
Flag Perth Australia
Thanks Meter: 0
 
17 posts
Join Date:Joined: Apr 2014
More
Quote:
Originally Posted by *fergs*

Ok thanks.

Will try that as well when I try #17 again shortly.

will make sure tablet is connected in APX before I click "dump"


I assume because I get all this way with multiple programs , the CPUID & SBK have to be correct ??

.

Just tried #15 via blackthunder APXflash & then dump the BCT.

No joy could not find the "bct.dec"

will continue & see what happens any way

.
2nd May 2014, 04:44 AM   |  #22  
OP Junior Member
Flag Perth Australia
Thanks Meter: 0
 
17 posts
Join Date:Joined: Apr 2014
More
babsector report
Up to trying Babsector now

Any thoughts please ???

output after A501 A.bat


************************************************** **************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
************************************************** **************

****************************************
* Reboot your tablet into APX mode *
****************************************

Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk

Enter your SBK:0xA8ABC201 0x4303C006 0x074924.. 0x8C5721..
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x0384018443cxxxxx
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 3

sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0

Press any key to continue . . .


output after A501B.bat


************************************************** **************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
************************************************** **************

****************************************
* Reboot your tablet into APX mode *
****************************************

Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk

Enter your SBK:0xA8ABC201 0x4303C006 0x074924.. 0x8C5721..
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x0384018443c0xxxx
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 3

sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: specified partition is invalid or does not exist (code: 7) me
ssage: nverror:0x42008 (0x6042008) flags: 0

Press any key to continue . . .


Anyone know what the errors are from OR is it just the tablet is stuffed ??

.
Last edited by *fergs*; 2nd May 2014 at 04:58 AM.
2nd May 2014, 05:17 AM   |  #23  
Senior Member
Flag Shake City
Thanks Meter: 437
 
1,548 posts
Join Date:Joined: Sep 2010
More
Faulty memory chip m8, Acer have been known to replace the m/board even on out of warranty tabs, for the price of shipping.....otherwise you could try the oven trick, couple of folks have had success with it http://forum.xda-developers.com/show....php?t=2738138

Sent from my HTC_PN071 using Tapatalk
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools
Display Modes