FORUMS

No, Android Apps on Windows Mobile Isn’t a Good Thing

As Symbian and Blackberry OS gradually gave way to Android and iOS towards … more

Editorial: XDA Team Experiences & Why We Love the Site

For many power users, Android and XDA go hand in hand. The sheer amount of apps, … more

Xiaomi Mi5 Specs Leaked, CyanogenMod SDK – XDA TV

CyanogenMod is going to release their own SDK! That and much more news is … more

Themes for SM-N910U Exynos Note 4

Samsung has too many phone variants for their flagships, which leaves out users incapable of getting … more
Post Reply Subscribe to Thread Email Thread

[Q] SM-N9005 HK softbricked. Please help

22nd January 2014, 12:34 PM |#11  
OP Junior Member
Thanks Meter: 18
 
More
Thumbs up
Hi guys, thanks a lot for your comments. I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)

1.- Flashed bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flased bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flased AP from N9005ZHUBMI7 (Honk Kong version)
4.- Entered recovery mode and wiped system, cache and dalvik (just in case)
4.- Flashed autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flased CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425

So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
The Following User Says Thank You to maumarti2k For This Useful Post: [ View ]
 
 
22nd January 2014, 10:11 PM |#12  
Junior Member
Thanks Meter: 7
 
More
is a 16gb

Quote:
Originally Posted by filchi756

Do you have the 16gb or the 32gb hongkong version?

The Following User Says Thank You to uglybb88 For This Useful Post: [ View ]
28th January 2014, 06:57 AM |#13  
Junior Member
Thanks Meter: 0
 
More
Question
Hi there,

I reached step 4 and flashed AP N9005ZHUDMJ8 (HK version too) but got an error. Is it a must to use your suggested version?

Thank you.

Quote:
Originally Posted by maumarti2k

Hi guys, thanks a lot for your comments. I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)

1.- Flashed bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flased bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flased AP from N9005ZHUBMI7 (Honk Kong version)
4.- Entered recovery mode and wiped system, cache and dalvik (just in case)
4.- Flashed autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flased CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425

So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.

28th January 2014, 09:21 AM |#14  
Locky Loki's Avatar
Senior Member
Flag Hong Kong
Thanks Meter: 84
 
More
Maybe I can help
Quote:
Originally Posted by fbasbas

Hi there,

I reached step 4 and flashed AP N9005ZHUDMJ8 (HK version too) but got an error. Is it a must to use your suggested version?

Thank you.

Maybe I can help.

Please read my article at http://forum.xda-developers.com/show...php?p=49831876
The Following User Says Thank You to Locky Loki For This Useful Post: [ View ]
2nd February 2014, 11:51 PM |#15  
OP Junior Member
Thanks Meter: 18
 
More
Quote:
Originally Posted by fbasbas

Hi there,

I reached step 4 and flashed AP N9005ZHUDMJ8 (HK version too) but got an error. Is it a must to use your suggested version?

Thank you.

Actually, I only got it to work with the version I mentioned in the post, I don't think I tried with the version you mention. If it failed, I'd suggest you start over, but this time try with the version I suggested, since at least I know this worked for 2 people already. Also, I believe you need to own a 16GB HK version, just in case, Hope this helps
19th March 2014, 08:25 PM |#16  
Junior Member
Thanks Meter: 0
 
More
Ask for Help
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005ZHUBMI7_1626679_REV03_user_low_ship_MULTI_ CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N9005XXUBMI5_REV03_CL1252918.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ZZH_N9005ZZHBMI7_1626679_REV03_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
can not..............hix hix hix
4th May 2014, 02:50 PM |#17  
semis0nic's Avatar
Member
Thanks Meter: 1
 
More
working solution
Download and ODIN flash N9005ZHUENB5 in sam mobile. Works on my HK Note 3

Quote:
Originally Posted by minhluansgk

<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005ZHUBMI7_1626679_REV03_user_low_ship_MULTI_ CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N9005XXUBMI5_REV03_CL1252918.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ZZH_N9005ZZHBMI7_1626679_REV03_user_low_ship_M ULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
can not..............hix hix hix

Post Reply Subscribe to Thread

Tags
4.4.2, brick bootloader, hong kong, kit kat, note 3
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes