FORUMS

[Q] help please..... phone bricked :(

126 posts
Thanks Meter: 11
 
By musheercmr, Senior Member on 18th May 2014, 08:21 PM
Post Reply Subscribe to Thread Email Thread
my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.

when i try to flash a stock room using Odin getting below error:

power + home + volume down > AP > choose tar file(N9005XXUDML2) > start


<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)



help please....
 
 
18th May 2014, 08:40 PM |#2  
Senior Member
Thanks Meter: 336
 
More
Quote:
Originally Posted by musheercmr

my phone (n9005) booting only to download mode with message "Firmware upgrade encountered an issue. Please select recover mode in kies & try again" phone was working well on Omega 14 before i flash another modem.

when i try to flash a stock room using Odin getting below error:

power + home + volume down > AP > choose tar file(N9005XXUDML2) > start


<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDML2_N9005OLBDMK2_N9005XXUDMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)



help please....



Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader

You can try to write stock 4.4.
The Following User Says Thank You to xclub_101 For This Useful Post: [ View ]
18th May 2014, 08:48 PM |#3  
musheercmr's Avatar
OP Senior Member
Flag Qatar
Thanks Meter: 11
 
More
Unhappy
Quote:
Originally Posted by xclub_101

Sorry, you can not return to 4.3 stock firmware once you have written the 4.4 bootloader

You can try to write stock 4.4.

what if flash N9005XXUEND6 using odin? will it work ?
18th May 2014, 09:00 PM |#4  
Senior Member
Thanks Meter: 336
 
More
Quote:
Originally Posted by musheercmr

what if flash N9005XXUEND6 using odin? will it work ?


If it is for the same model and region as your N9005 it could/should work, otherwise you might still see problems. Be careful not to confuse Hong-Kong 16GB model with EU 32GB models, also there have been some problems with other hardware or CSC combinations.
The Following User Says Thank You to xclub_101 For This Useful Post: [ View ]
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes