Post Reply

[Q] Soft bricked (hopefully) my phone when rooting. Help, please?

OP Oddity3

25th May 2014, 03:47 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: May 2014
A few months ago, I got a (Verizon) Samsung Galaxy S4 (it was "free" with contract). I successfully rooted it not long after.
Just a couple weeks ago, an update was released through the verizon network, so blindly I decided to use the update, only to find out afterwards that it removed my root. I tried the same method I used before to root it, only to find people saying that the newest OTA (Over The Air) update made rooting impossible.
After a fair amount of searching, I found a method which supposedly would work (http://forum.xda-developers.com/show....php?t=2487142). I used the method, however it did not work, and my phone was stuck in download mode.
After previous reading, I learned that the only way to manually exit download mode was to take out the battery. Though the root attempt had failed, it was obvious that something had occurred, so I was hesitant to use the brute force method of exiting download mode. However, without knowing an alternative, I removed the battery.
Now, whenever I try to turn on my phone, I merely get the message "Firmware update has encountered an issue. Please select recovery mode in Kies and try again."

If it helps, the text displayed in the upper corner with this message is:
ODIN MODE
PRODUCT NAME: SCH-I545
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE enabled

I have tried firmware upgrade and initialization in Kies3, but an error message is shown saying "SCH-I545 does not support initialization", When I tried Kies2, it just told me that the device was not responding.
I am still able to enter download mode.
When I try to flash an os using odin, I get these results:

<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

And in the corner of my phone screen, a red message appears which says:

START [224,1440]
SW REV. CHECK FAIL : fused : 6 , Binary : 5

If there is any more information you would need, please let me know.
25th May 2014, 07:01 PM   |  #2  
Senior Member
Thanks Meter: 185
 
931 posts
Join Date:Joined: Nov 2008
More
Quote:
Originally Posted by Oddity3

..... please let me know.

After some time spent on really deep and sophisticated analysis of your problem, I think that you will have a very good option of solving your problems described here
25th May 2014, 07:13 PM   |  #3  
Member
Thanks Meter: 13
 
53 posts
Join Date:Joined: Feb 2014
I don't have the Verizon version but maybe try reflashing stock file in odin
25th May 2014, 09:14 PM   |  #4  
Joku1981's Avatar
Senior Member
Thanks Meter: 558
 
1,811 posts
Join Date:Joined: Jun 2012
Donate to Me
More
Quote:
Originally Posted by bdog2015

I don't have the Verizon version but maybe try reflashing stock file in odin

There isn't solution for:
START [224,1440]
SW REV. CHECK FAIL : fused : 6 , Binary : 5
You can get it to repair to service center.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy S 4 Q&A, Help & Troubleshooting by ThreadRank