Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,768,101 Members 43,638 Now Online
XDA Developers Android and Mobile Development Forum

[Release]For-Fun Q3 Main V1.4 ROM

Tip us?
 
chunk1189
Old
#1  
Junior Member - OP
Thanks Meter 6
Posts: 12
Join Date: Jan 2014
Wink [Release]For-Fun Q3 Main V1.4 ROM

Hello,

So i noticed alot of people having trouble finding this ROM with the ZET6223/WTA drivers, here is a quick guide and a download link (had to remove the original on another topic as it was being shared on various forums with no link back) please if you share this link it back to xda!

**This guide asumes you know how to use adb and you have the correct usb drivers, also please note this is for the 9'inch version but may work on the 7, please reply to thread with details if it does**

GUIDE: Step.1: Once downloaded extract it to desktop, then open live suit (i personally used version 1.09), select option no on the update wizard, then click select image, locate the image extracted from the download, keep this live suit window open whilst you perform step 2.

Step.2: While you're tablet is powered off fully (there will be no lights) connect it to the usb port on you're laptop/desktop, the tablet will automatically attempt to start up, whilst still keeping the tablet connected via usb press and hold the power button on it for around 6 seconds until it powers off again, (you may see a red light to indicate its charging this is normal) now that the tablet is off press and hold the volume up key and quickly tap the power button 6 times, wait until you see a box popup on you're desktop/laptop on live suit saying to format the tablet, then release the volume button and proceed to pressing yes to format the tablet via the live suit window, it will then preform the flashing and should take anywhere from 2 to 6 minutes, once it has completed the tablet will boot up normally, disconnect the usb cable.

Hopefully if you followed this correctly and used the provided firmware you're tablet should function as intended. If you get stuck or require a talk through it including how to get adb/live suit ect feel free to skype me on id: chunk1189.

Download: For-Fun Q3 Main v1.2)v1.3) v1.4) Firmware(ZET6223/WTA)
Code:
http://www.mediafire.com/download/21r6rurrhwyc0jd/For-Fun+Q3+Main+v.1.4%28ZET6223WTA%29.rar
PASSWORD:
Code:
chunk1189
Download: Live Suit v1.09
Code:
http://www.mediafire.com/download/1zq3jmmnxv6vi5s/Live+Suit+v1.09.rar
Please say thanks and share results!
The Following 5 Users Say Thank You to chunk1189 For This Useful Post: [ Click to Expand ]
 
oneun
Old
#2  
Junior Member
Thanks Meter 0
Posts: 1
Join Date: May 2014
I hope it would work dude.. im gonna test this to my fake samsung android tablet model:901 made in korea... anyway tnx a lot
 
quincyquinn
Old
#3  
quincyquinn's Avatar
Member
Thanks Meter 8
Posts: 52
Join Date: Sep 2012
Quote:
Originally Posted by chunk1189 View Post
Hello,

So i noticed alot of people having trouble finding this ROM with the ZET6223/WTA drivers, here is a quick guide and a download link (had to remove the original on another topic as it was being shared on various forums with no link back) please if you share this link it back to xda!

**This guide asumes you know how to use adb and you have the correct usb drivers, also please note this is for the 9'inch version but may work on the 7, please reply to thread with details if it does**

GUIDE: Step.1: Once downloaded extract it to desktop, then open live suit (i personally used version 1.09), select option no on the update wizard, then click select image, locate the image extracted from the download, keep this live suit window open whilst you perform step 2.

Step.2: While you're tablet is powered off fully (there will be no lights) connect it to the usb port on you're laptop/desktop, the tablet will automatically attempt to start up, whilst still keeping the tablet connected via usb press and hold the power button on it for around 6 seconds until it powers off again, (you may see a red light to indicate its charging this is normal) now that the tablet is off press and hold the volume up key and quickly tap the power button 6 times, wait until you see a box popup on you're desktop/laptop on live suit saying to format the tablet, then release the volume button and proceed to pressing yes to format the tablet via the live suit window, it will then preform the flashing and should take anywhere from 2 to 6 minutes, once it has completed the tablet will boot up normally, disconnect the usb cable.

Hopefully if you followed this correctly and used the provided firmware you're tablet should function as intended. If you get stuck or require a talk through it including how to get adb/live suit ect feel free to skype me on id: chunk1189.

Download: For-Fun Q3 Main v1.2)v1.3) v1.4) Firmware(ZET6223/WTA)
Code:
http://www.mediafire.com/download/21r6rurrhwyc0jd/For-Fun+Q3+Main+v.1.4%28ZET6223WTA%29.rar
PASSWORD:
Code:
chunk1189
Download: Live Suit v1.09
Code:
http://www.mediafire.com/download/1zq3jmmnxv6vi5s/Live+Suit+v1.09.rar
Please say thanks and share results!
Thanks @chunk1189 this worked for a Chimp Tab 9(For-Fun+Q3+Main+v.1.4), its all up and running after been stuck in a boot loop. Thank's for your great guide....
The Following User Says Thank You to quincyquinn For This Useful Post: [ Click to Expand ]
 
johnsmith33584
Old
#4  
Member
Thanks Meter 19
Posts: 52
Join Date: May 2014
Quote:
Originally Posted by chunk1189 View Post
Hello,

So i noticed alot of people having trouble finding this ROM with the ZET6223/WTA drivers, here is a quick guide and a download link (had to remove the original on another topic as it was being shared on various forums with no link back) please if you share this link it back to xda!

**This guide asumes you know how to use adb and you have the correct usb drivers, also please note this is for the 9'inch version but may work on the 7, please reply to thread with details if it does**

GUIDE: Step.1: Once downloaded extract it to desktop, then open live suit (i personally used version 1.09), select option no on the update wizard, then click select image, locate the image extracted from the download, keep this live suit window open whilst you perform step 2.

Step.2: While you're tablet is powered off fully (there will be no lights) connect it to the usb port on you're laptop/desktop, the tablet will automatically attempt to start up, whilst still keeping the tablet connected via usb press and hold the power button on it for around 6 seconds until it powers off again, (you may see a red light to indicate its charging this is normal) now that the tablet is off press and hold the volume up key and quickly tap the power button 6 times, wait until you see a box popup on you're desktop/laptop on live suit saying to format the tablet, then release the volume button and proceed to pressing yes to format the tablet via the live suit window, it will then preform the flashing and should take anywhere from 2 to 6 minutes, once it has completed the tablet will boot up normally, disconnect the usb cable.

Hopefully if you followed this correctly and used the provided firmware you're tablet should function as intended. If you get stuck or require a talk through it including how to get adb/live suit ect feel free to skype me on id: chunk1189.



Please say thanks and share results!
Will do!!!
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes