Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,733,782 Members 45,249 Now Online
XDA Developers Android and Mobile Development Forum

MyMind's Kernel Swap

Tip us?
 
Modding.MyMind
Old
(Last edited by Modding.MyMind; 27th May 2014 at 01:02 PM.)
#1  
Modding.MyMind's Avatar
Senior Member - OP
Thanks Meter 1266
Posts: 1,452
Join Date: Nov 2013
Location: Richmond, Virginia

 
DONATE TO ME
Default MyMind's Kernel Swap

MyMinds_Kernel_Swap
===================


Based on AnyKernel, but pretty much rebuilt in every way so that it will actually work. So, many thanks to Koush for the idea.

The Idea and What It Does...
=======================


Some but not all of this script has been snippets here and there from ArchiKitchen and DSIXDA Kitchen.

This has allowed me to formulate a zip as such without the need to technically build from scratch saving me LOADS OF HOURS.

It currently uses my static compiled mkbootimg, unmkbootimg, and mkbootfs binaries to allow editing, and rebuilding of the boot.img.

Some serious modifications were made to get this to work successfully with MUCH DEBUGGING. If you change something and it breaks another function then that is on you!

# IT IS CURRENTLY STABLE!


1. It will pull your current boot.img using dd.

2. It will search for the Android! header in the boot.img and remove the unnecessary junk before it if needed to.

3. It will split the boot.img in to the kernel and ramdisk.

4. It will unpack the contents inside the ramdisk.

5. It will modify the default.prop file giving you insecure ADB. If you already have it then this will not affect you.

6. It will modify the init.rc file to give support for init.d. If you already have it then this will not affect you.

7. It will write to sysinit and install-recovery.sh for the completion of init.d support. If already done, then this will not affect you.

8. It will make the init.d folder under /system/etc on your device with required permissions.

9. It will place an init.d script to test to see if init.d is fully working. If it works, you will find a file called, HAS_INIT, located in the /dev directory of your device.

10. It will swap out the original kernel with a new prebuilt kernel upon rebuilding the new boot.img

11. It will repack you a new ramdisk using mkbootfs to be applied to your new boot.img upon rebuilding it.

12. It will remove your old modules and push your new modules that came with your new prebuilt kernel.

13. It will write your new boot.img to your boot partition using dd.

14. Hopefully, more to come!

MAKE SURE YOU CHANGE...
=======================

"$BOOT_PARTITION" ACCORDING TO YOUR DEVICE BEFORE USING THIS SCRIPT!!!!!!

How to use it...
==============

1. Place your prebuilt kernel in the prebuilt folder and insure it is named, zImage.

2. Place kernel modules in the modules folder.

3. Zip, and flash in TWRP recovery.

If you have any suggestions to add then let me know. My ears are open to them.

https://github.com/ModdingMyMind/MyMinds_Kernel_Swap

Sent from my C525c using Tapatalk
The Following 3 Users Say Thank You to Modding.MyMind For This Useful Post: [ Click to Expand ]
 
J.ali.li
Old
#2  
J.ali.li's Avatar
Senior Member
Thanks Meter 31
Posts: 116
Join Date: Dec 2012
Location: Qom
What is this script supposed to do? I read the op but I did not found any thing clear ,since I'm not in this kernel stuff
 
Modding.MyMind
Old
#3  
Modding.MyMind's Avatar
Senior Member - OP
Thanks Meter 1266
Posts: 1,452
Join Date: Nov 2013
Location: Richmond, Virginia

 
DONATE TO ME
It's a flashable zip that will unpack your boot.img, swap out the old with the new kernel, add init.d support if needed, and install the new modules that came with the kernel.

Sent from my C525c using Tapatalk
The Following User Says Thank You to Modding.MyMind For This Useful Post: [ Click to Expand ]
Thread Tools
Display Modes