FORUMS
Post Reply Subscribe to Thread Email Thread

Flashing firmware

28th May 2014, 12:59 PM |#1  
smgulsby's Avatar
OP Senior Member
Thanks Meter: 81
 
More
I am s-on can I still flash firmware? If so I am on ATT US which one would I use. This is all confusing to me.
 
 
28th May 2014, 03:15 PM |#2  
Seanie280672's Avatar
Senior Member
Flag Halesowen
Thanks Meter: 676
 
Donate to Me
More
No you can't, you must be s-off to flash firmware and I wouldn't advise going s-off unless you know exactly what you are doing.
28th May 2014, 04:36 PM |#3  
Quote:
Originally Posted by smgulsby

I am s-on can I still flash firmware? If so I am on ATT US which one would I use. This is all confusing to me.

with S-On you can only flash signed firmware, with same or higher version as yours, and correct CID and MID
you'll also need to relock bootloader to be able to flash it (with S-On), then unlock again.

remember signed firmware will include boot.img (kernel), and recovery.img (stock recovery), so after flashing firmware, you need to unlock again and reflash custom recovery, and whatever kernel comes with the ROM you're using.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes