Post Reply

[ODIN][TAR] 4.4.3 I9505GUEUCNE3 Full Rooted Restore

OP SamuriHL

4th June 2014, 03:00 AM   |  #1  
SamuriHL's Avatar
OP Senior Member
Thanks Meter: 1,512
 
2,510 posts
Join Date:Joined: Aug 2010
More
NE3 is released.

WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.

Kernel Source:

http://opensource.samsung.com/recept...alue=GT-I9505G

OTA zip (must be sideloaded in stock recovery):

http://android.clients.google.com/pa...Update_FWD.zip

Root method (does not overwrite stock recovery):

http://www.mediafire.com/download/tn...4_GPE_ROOT.zip

ODIN FULL RECOVER IMAGE (root is built in):

Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):

http://forum.xda-developers.com/show....php?t=2398217

(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.


INSTRUCTIONS:

WARNING: Please do not flash this if you're low on battery...go charge your phone!

o) Download the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUCxxx_FULL_ROOTED.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done

NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.

DOWNLOADS:

ODIN 3.09

I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz

A GIANT thank you to @MJHawaii for helping me learn this process!!!
Last edited by SamuriHL; 29th June 2014 at 03:54 AM.
The Following 14 Users Say Thank You to SamuriHL For This Useful Post: [ View ]
4th June 2014, 03:04 AM   |  #2  
SamuriHL's Avatar
OP Senior Member
Thanks Meter: 1,512
 
2,510 posts
Join Date:Joined: Aug 2010
More
RESERVED
4th June 2014, 03:30 AM   |  #3  
SamuriHL's Avatar
OP Senior Member
Thanks Meter: 1,512
 
2,510 posts
Join Date:Joined: Aug 2010
More
ODIN image is posted. Enjoy!
4th June 2014, 04:06 AM   |  #4  
Member
Thanks Meter: 17
 
60 posts
Join Date:Joined: Jan 2012
More
Flashed and booted without a hitch! Thanks
4th June 2014, 04:08 AM   |  #5  
SamuriHL's Avatar
OP Senior Member
Thanks Meter: 1,512
 
2,510 posts
Join Date:Joined: Aug 2010
More
Not a problem. Enjoy!
4th June 2014, 08:24 AM   |  #6  
imneo1's Avatar
Senior Member
Thanks Meter: 32
 
160 posts
Join Date:Joined: Mar 2010
Donate to Me
More
Update:

I extracted the file from the 4.2.2 stock system dump and replaced it.
it has a different sha1sum than what was on the device but still i get the same error when sideload the 4.4.3 zip



got error "status 7" when sideload : "/system/bin/debuggerd" has unexpected contents."
can anyone extract the stock debuggerd file so i can replace at (/system/bin) ?
Last edited by imneo1; 4th June 2014 at 09:32 AM.
4th June 2014, 10:29 AM   |  #7  
SamuriHL's Avatar
OP Senior Member
Thanks Meter: 1,512
 
2,510 posts
Join Date:Joined: Aug 2010
More
Why are you making your life more difficult than you need? Just flash this odin package and be done with it.

Sent from my SM-P600 using Tapatalk
The Following User Says Thank You to SamuriHL For This Useful Post: [ View ]
4th June 2014, 12:38 PM   |  #8  
imneo1's Avatar
Senior Member
Thanks Meter: 32
 
160 posts
Join Date:Joined: Mar 2010
Donate to Me
More
When you are right you are right
Works

Quote:
Originally Posted by SamuriHL

Why are you making your life more difficult than you need? Just flash this odin package and be done with it.

Sent from my SM-P600 using Tapatalk

4th June 2014, 01:30 PM   |  #9  
SamuriHL's Avatar
OP Senior Member
Thanks Meter: 1,512
 
2,510 posts
Join Date:Joined: Aug 2010
More
Excellent

Sent from my SM-P600 using Tapatalk
4th June 2014, 06:17 PM   |  #10  
Member
Thanks Meter: 1
 
38 posts
Join Date:Joined: Sep 2007
Quote:
Originally Posted by SamuriHL

NE3 is released.

WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.

Kernel Source:

Not posted yet

OTA zip (must be sideloaded in stock recovery):

http://android.clients.google.com/pa...Update_FWD.zip

Root method (does not overwrite stock recovery):

http://www.mediafire.com/download/tn...4_GPE_ROOT.zip

ODIN FULL RECOVER IMAGE (root is built in):

Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):

http://forum.xda-developers.com/show....php?t=2398217

(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.


Instructions

1. Download the I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz package from below
2. Make sure you have the USB Drivers installed and you have Odin 3.09
3. Please do not flash this if you're low on battery, Go charge your phone!
4. Open up Odin and click on PDA (or AP in 3.09+), then select the I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz package you downloaded
5. Odin will need to extract the tar md5 file from the gzip archive, and this will take a while
6. This is a massive file give it time to load up in Odin and Make sure you have a COM PORT in Odin ( any )
7. Click Start and wait till it finishes flashing
8. If your phone does not boot right back up then boot into stock recovery and Wipe Data Factory Reset.

I9505GUEUCNE3_FULL_ROOTED.tar.md5.gz

A GIANT thank you to @MJHawaii for helping me learn this process!!!

Hi there. I have I S4 9505g. I'm not rooted and fully stock. Can I use Odin with this system image to get root. I have experience with rooting and flashing just new to this device. I'm assuming that I have to go through and root first then put twrp on. Thanks

Sent from my Samsung Galaxy S4 GT-9505g

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Galaxy S 4 i9505G Android Development by ThreadRank