FORUMS

CloudPlayer: DIY HiFi Music Streaming Solution

In our Helpful Guide to Music Streaming Services, we mentioned several different services … more

Optimize Battery Life with This Useful App

Battery life is an important aspect of your smartphone, especially if you use it for more … more

The OnePlus 2 & The Year of Smartphone Compromises

We are very close to entering the last third of 2015, and we have now seen many of … more

OnePlus 2 Teardown, Major Android Vulnerability – XDA TV

The OnePlus 2 has been officially released. That and much more news is … more

can not able to flash!!!

147 posts
Thanks Meter: 14
 
By ornobohornish, Senior Member on 7th June 2014, 05:48 PM
Post Reply Subscribe to Thread Email Thread
Whenever I am trying to flash my note pro every time odin faild to flash and on my device showing "Invalid ext4 Image" even whenever I want to emergency firmware recovery or update, also failed and stuck on download mode and my device says "invalid ext4 img"

Firmware installation stuck on "invalid ext4 img" for odin or kies both.

My device is SM-P905

Already I have downloaded 3 rom from sammobile, but all file failed to install!

the file are:

P905XXUANAE_P905DBTANA6_DBT.zip

P905XXUANAE_P905OXXANA7_BTU.zip

P905XXUANC3_P905BTUAND2_BTU.zip



when I am trying to flash, odin says:

"<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P905XXUANC3_P905BTUAND2_P905XXUANA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!"


** I have tried using different usb cable to flash

** I have tried both 3.9 or 3.7 odin

** I have tried different pc to flash

** I have used 2.0 or 3.0 both usb cable

** I have tried both kies3 or previous kies

** I am thinking may be the problem is about pit. and I don't know where I will find a .pit file for SM-P905. some how may be the pit of my note pro is corrupted. i don't know actually I am not a developer!
Last edited by ornobohornish; 8th June 2014 at 04:20 AM.
 
 
7th June 2014, 06:01 PM |#2  
Senior Member
Flag Honolulu, Hawaii
Thanks Meter: 228
 
More
It would probably be helpful to others if you indicate firmware versions both existing and the one you are attempting to flash in addition to the source of the image you're trying to flash.

Sent from my SM-P900 using Tapatalk
7th June 2014, 08:06 PM |#3  
cavkic's Avatar
Senior Member
Flag Bihac
Thanks Meter: 13
 
More
Sounds like your file is bad or the download is corrupted... Try another firmware from sammobile.
8th June 2014, 04:21 AM |#4  
OP Senior Member
Thanks Meter: 14
 
More
Already I have downloaded 3 rom from sammobile, but all file failed to install!

the file are:

P905XXUANAE_P905DBTANA6_DBT.zip

P905XXUANAE_P905OXXANA7_BTU.zip

P905XXUANC3_P905BTUAND2_BTU.zip
8th June 2014, 04:44 AM |#5  
OP Senior Member
Thanks Meter: 14
 
More
Already I have downloaded 3 rom from sammobile, but all file failed to install!

the file are:

P905XXUANAE_P905DBTANA6_DBT.zip

P905XXUANAE_P905OXXANA7_BTU.zip

P905XXUANC3_P905BTUAND2_BTU.zip


and my existing firware is:
Baseband version: P905XXUANA7
Build number: KOT49H.P905XXUANAE

I am also giving the screen shot bellow!
8th June 2014, 04:53 AM |#6  
OP Senior Member
Thanks Meter: 14
 
More
screen shot
Quote:
Originally Posted by muzzy996

It would probably be helpful to others if you indicate firmware versions both existing and the one you are attempting to flash in addition to the source of the image you're trying to flash.

Sent from my SM-P900 using Tapatalk

Already I have downloaded 3 rom from sammobile, but all file failed to install!

the file are:

P905XXUANAE_P905DBTANA6_DBT.zip

P905XXUANAE_P905OXXANA7_BTU.zip

P905XXUANC3_P905BTUAND2_BTU.zip


and my existing firware is:
Baseband version: P905XXUANA7
Build number: KOT49H.P905XXUANAE

I am also giving the screen shot bellow!
Attached Thumbnails
Click image for larger version

Name:	Screenshot_2014-06-08-09-22-44.jpg
Views:	58
Size:	209.5 KB
ID:	2786529  
8th June 2014, 07:57 AM |#7  
OP Senior Member
Thanks Meter: 14
 
More
YES
Quote:
Originally Posted by cavkic

Sounds like your file is bad or the download is corrupted... Try another firmware from sammobile.

Already I have downloaded 3 rom from sammobile, but all file failed to install!

the file are:

P905XXUANAE_P905DBTANA6_DBT.zip

P905XXUANAE_P905OXXANA7_BTU.zip

P905XXUANC3_P905BTUAND2_BTU.zip
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes