Details About XXUANC1 Android 4.2.2 Jelly Bean Firmware:
Model name: Galaxy Tab 3 Lite 3G T111
Country: New Zeland
Version: Android 4.2.2
Build date: 12.03.2014
How To Update Galaxy Tab 3 Lite T111 To XXUANC1 Android 4.2.2 Jelly Bean
We have put together all detailed step-by-step guides on how to update Samsung Galaxy Tab 3 Lite T111 to XXUANC1 Android 4.2.2 Jelly Bean. If you are used to installing official updates through ODIN on Samsung Galaxy devices, then this should not be any different for you.
Please read every line carefully and make sure you read the entire tutorial once before actually performing it on your phone.
- This tutorial for installing XXUANC1 Android 4.2.2 Jelly Bean is only for Samsung Galaxy Tab 3 Lite T111. Please don’t try this with other Android device.
- This is an official Samsung firmware, not a custom ROM or a modified firmware.
- Make sure you backup all your data in your phone before proceeding.
Rooting Warning: This is an official Android 4.2.2 build XXUANC1 update for Galaxy Tab 3 Lite T111, which means you will lose root after installing this update. You will again have to root Galaxy Tab 3 Lite 3G to gain full system access and be able to install root apps again. We will post an article soon on How to Root Galaxy Tab 3 Lite official firmware. So stay tuned with us.
Entire Step-By-Step Procedure:
Step 1 - Download Android 4.2.2 T111XXUANC1 for Galaxy Tab 3 Lite 3G T111 to your computer and extract the zip file:
Link : DOWNLOAD XXUANC1 Android 4.2.2 Stock ROM for Galaxy Tab 3 Lite 3G T111
Step 2 - Download ODIN v3.07 which will help you to install Android 4.2.2 on Samsung Galaxy Tab 3 Lite T111.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy Tab 3 Lite T111 USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
Click on ‘PDA’ and select file with ‘CODE’ in its name.
Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy Tab 3 Lite 3G T111 has now been updated to Android 4.2.2 Jelly Bean build XXUANC1 software update. Go to Settings > About phone to verify what build have you installed.