Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,728,708 Members 52,477 Now Online
XDA Developers Android and Mobile Development Forum

[Q]Troubles fixing Cubot one

Tip us?
 
Alastor56
Old
(Last edited by Alastor56; 3rd May 2014 at 06:05 AM.)
#1  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: May 2014
Default [Q]Troubles fixing Cubot one

Hi !

Today the screen of my Cubot One went black, when I turn it on and off the problem remains, I can still lock the screen.

I downloaded a ROM and I tried installing it with both "Smart Phone Flash Tool" and "SP Flash tool" (Or maybe it is 2 different versions of the same software).

I load the scatter file but when I hit the "download' button nothing happens...

Can you please help me with my problem ?

Edit: Now I get this message: "ENABLE DRAM FAILED!"
 
Alastor56
Old
#2  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: May 2014
Default rscredin The

up
 
abanuelosh
Old
#3  
Junior Member
Thanks Meter 1
Posts: 14
Join Date: May 2014
Default My phone is experimenting some similar issue

I tried to change the recovery in my cubot one (the grey one), supossedly it has the mt6589t SoC, but every try failed, then I thought to change the firmware (the firmware the phone had was G800_CUBOT_D1_V1.3_"some_number_here"_MJK), with the firmware G800_CUBOT_D1_V0.8_20140124_MJK, i employed the SP tools without problem, the download was succefully, the i put the battery on again, then i switched it on, the telephone started, the screen lites on, but the screen keeps black, it sounds like boots normally, even the unlock screen sound normal, but there is no image in the screen, I've looked for the newer firmware everywhere but I did not found it, somebody could help me, please!!!

The firmware I used to flash the phone succesfully was the cubot one turbo available in the needrom page. Maybe the newer versions of cubot one have a new graphic chip or something different.
 
abanuelosh
Old
#4  
Junior Member
Thanks Meter 1
Posts: 14
Join Date: May 2014
Default The error...

Quote:
Originally Posted by Alastor56 View Post
Hi !

Today the screen of my Cubot One went black, when I turn it on and off the problem remains, I can still lock the screen.

I downloaded a ROM and I tried installing it with both "Smart Phone Flash Tool" and "SP Flash tool" (Or maybe it is 2 different versions of the same software).

I load the scatter file but when I hit the "download' button nothing happens...

Can you please help me with my problem ?

Edit: Now I get this message: "ENABLE DRAM FAILED!"

The cause of this error is trying to flasn an incorrect ROM image in the device, there are a lot of versions of cubot one, did you tried the roms in needrom_com?
 
spreadtrumphone
Old
#5  
Junior Member
Thanks Meter 0
Posts: 4
Join Date: Apr 2013
Default Same prob.

I've same problem. Only black screen (but sounds like boot normally). Did anyone resolve this issue?
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes