Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

[Q] Status 7 error while trying to install StockMOD rom 4.3

OP Slade420

5th June 2014, 04:31 AM   |  #1  
OP Junior Member
Thanks Meter: 0
 
2 posts
Join Date:Joined: Jun 2014
I have a SGH-i747 and have been trying to install This ROM(StockMODCustomROM4.3RLS2.1). I'm currently running the latest 6.0.4.7 cwm recovery, and I have also already tried to remove asserts from the updater-script but there wasnt any.

This is what the updater-script file says:
show_progress(1.0, 6000);

ui_print(" ");
ui_print("Installing ROM Update... ");

format("ext4", "EMMC", "/dev/block/mmcblk0p14");
mount("ext4", "EMMC", "/dev/block/mmcblk0p14", "/system");
package_extract_dir("system", "/system");
ui_print(" Symlinking");
symlink("dumpstate", "/system/bin/dumpcrash");
symlink("toolbox", "/system/bin/cat");
symlink("toolbox", "/system/bin/chmod");
symlink("toolbox", "/system/bin/chown");
symlink("toolbox", "/system/bin/cmp");
symlink("debuggerd", "/system/bin/csview");
symlink("toolbox", "/system/bin/date");
symlink("toolbox", "/system/bin/dd");
symlink("toolbox", "/system/bin/df");
symlink("toolbox", "/system/bin/dmesg");
symlink("toolbox", "/system/bin/getevent");
symlink("toolbox", "/system/bin/getprop");
symlink("toolbox", "/system/bin/hd");
symlink("toolbox", "/system/bin/id");
symlink("toolbox", "/system/bin/ifconfig");
symlink("toolbox", "/system/bin/iftop");
symlink("toolbox", "/system/bin/insmod");
symlink("toolbox", "/system/bin/ioctl");
symlink("toolbox", "/system/bin/ionice");
symlink("toolbox", "/system/bin/kill");
symlink("toolbox", "/system/bin/ln");
symlink("toolbox", "/system/bin/log");
symlink("toolbox", "/system/bin/ls");
symlink("toolbox", "/system/bin/lsmod");
symlink("toolbox", "/system/bin/lsof");
symlink("toolbox", "/system/bin/mkdir");
symlink("toolbox", "/system/bin/mount");
symlink("toolbox", "/system/bin/mv");
symlink("toolbox", "/system/bin/nandread");
symlink("toolbox", "/system/bin/netstat");
symlink("toolbox", "/system/bin/newfs_msdos");
symlink("toolbox", "/system/bin/notify");
symlink("toolbox", "/system/bin/printenv");
symlink("toolbox", "/system/bin/ps");
symlink("toolbox", "/system/bin/reboot");
symlink("toolbox", "/system/bin/renice");
symlink("toolbox", "/system/bin/rm");
symlink("toolbox", "/system/bin/rmdir");
symlink("toolbox", "/system/bin/rmmod");
symlink("toolbox", "/system/bin/route");
symlink("toolbox", "/system/bin/schedtop");
symlink("toolbox", "/system/bin/sendevent");
symlink("toolbox", "/system/bin/setconsole");
symlink("toolbox", "/system/bin/setprop");
symlink("mksh", "/system/bin/sh");
symlink("toolbox", "/system/bin/sleep");
symlink("toolbox", "/system/bin/smd");
symlink("toolbox", "/system/bin/start");
symlink("toolbox", "/system/bin/stop");
symlink("toolbox", "/system/bin/sync");
symlink("toolbox", "/system/bin/top");
symlink("toolbox", "/system/bin/touch");
symlink("toolbox", "/system/bin/umount");
symlink("toolbox", "/system/bin/uptime");
symlink("toolbox", "/system/bin/vmstat");
symlink("toolbox", "/system/bin/watchprops");
symlink("toolbox", "/system/bin/wipe");
symlink("toolbox", "/system/bin/chcon");
symlink("toolbox", "/system/bin/setenforce");
symlink("toolbox", "/system/bin/grep");
symlink("toolbox", "/system/bin/runcon");
symlink("toolbox", "/system/bin/touchinput");
symlink("toolbox", "/system/bin/md5");
symlink("toolbox", "/system/bin/getsebool");
symlink("toolbox", "/system/bin/setsebool");
symlink("toolbox", "/system/bin/restorecon");
symlink("toolbox", "/system/bin/getenforce");
symlink("toolbox", "/system/bin/load_policy");
symlink("toolbox", "/system/bin/cp");
symlink("toolbox", "/system/bin/playback");
symlink("toolbox", "/system/bin/du");
symlink("wiperiface_v02", "/system/bin/wiperiface");
ui_print(" Setting Permissions");
set_perm_recursive(0, 0, 0755, 0644, "/system");
set_perm_recursive(0, 0, 0777, 0777, "/system/etc/init.d");
set_perm_recursive(0, 2000, 0755, 0755, "/system/bin");
set_perm(0, 3003, 06755, "/system/bin/ip");
set_perm(0, 3003, 02750, "/system/bin/netcfg");
set_perm(0, 3004, 02755, "/system/bin/ping");
set_perm(0, 2000, 06750, "/system/bin/run-as");
set_perm_recursive(1002, 1002, 0755, 0440, "/system/etc/bluetooth");
set_perm(0, 0, 0755, "/system/etc/bluetooth");
set_perm(1000, 1000, 0640, "/system/etc/bluetooth/auto_pairing.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/blacklist.conf");
set_perm(1000, 1000, 0640, "/system/etc/bluetooth/auto_pair_devlist.conf");
set_perm(1002, 1002, 0440, "/system/etc/dbus.conf");
set_perm(1014, 2000, 0550, "/system/etc/dhcpcd/dhcpcd-run-hooks");
set_perm(0, 2000, 0550, "/system/etc/init.goldfish.sh");
set_perm_recursive(0, 0, 0755, 0555, "/system/etc/ppp");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor");
set_perm_recursive(0, 0, 0755, 0644, "/system/vendor/firmware");
set_perm(0, 2000, 0755, "/system/vendor/firmware");
set_perm(0, 2000, 0755, "/system/vendor/lib");
set_perm(0, 2000, 0755, "/system/vendor/lib/hw");
set_perm(0, 0, 0711, "/system/bin/.ext");
set_perm(0, 0, 0755, "/system/bin/.ext/.su");
set_perm(0, 0, 0755, "/system/xbin/su");
set_perm(0, 0, 0755, "/system/xbin/daemonsu");
set_perm(0, 0, 0755, "/system/etc/install-recovery.sh");
set_perm(0, 0, 0644, "/system/etc/.has_su_daemon");
set_perm(0, 0, 0644, "/system/etc/.installed_su_daemon");
set_perm(0, 0, 04755, "/system/xbin/run-parts");
set_perm(0, 0, 04755, "/system/xbin/bash");
set_perm(0, 0, 04755, "/system/xbin/sqlite3");
package_extract_file("boot.img", "/dev/block/mmcblk0p7");
symlink("/system/xbin/busybox", "/system/bin/busybox");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
set_perm(0, 1000, 0755, "/system/xbin/busybox");
symlink("/system/xbin/busybox", "/system/bin/busybox");
ui_print(" Installing Busybox");
run_program("/system/xbin/busybox", "--install", "-s", "/system/xbin");
ui_print(" ");
ui_print(" ");
ui_print(" ");
ui_print(" ");
ui_print("Finished Installing. ");
ui_print("First boot may take a while...");
ui_print("Please be patient and wait ");
ui_print(" ");
ui_print(" ");
ui_print("======================================== ========");
ui_print(" Enjoy! And remember to visit us on xda ");
ui_print(" Share your experiences with us as well! ");
ui_print(" ");
ui_print(" -Team Inferno- ");
ui_print("======================================== ========");
ui_print(" ");
ui_print(" ");
unmount("/system");
6th June 2014, 01:31 AM   |  #2  
audit13's Avatar
Senior Member
Toronto
Thanks Meter: 994
 
3,143 posts
Join Date:Joined: Jun 2012
More
Are you on a 4.3 bootloader and modem?
25th June 2014, 07:21 AM   |  #3  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Jun 2014
Possibly same problem, more detail
Posting here because I'm not allowed to post to the thread for the ROM.

EDIT: I have an SGH-I747 which was, before I started, running OTA 4.3. I installed both Clockworkmod 6.0.4.7 and TWRP 2.7.0.0, as well as ROM Manager. It occurs to me that I didn't try using TWRP to do the install, just CWM. I did flash I747UCUEMJB Modem even though I probably didn't need to, since I was already running UCUEMJB, and I did the "wipe data/factory reset" and "wipe cache partition" steps in CWM.

EDIT2: I tried flashing the ROM again with TWRP and that seems to have done the trick.

Quote:
Originally Posted by Slade420

I have a SGH-i747 and have been trying to install This ROM(StockMODCustomROM4.3RLS2.1). I'm currently running the latest 6.0.4.7 cwm recovery, and I have also already tried to remove asserts from the updater-script but there wasnt any.

This is what the updater-script file says:
show_progress(1.0, 6000);

ui_print(" ");
ui_print("Installing ROM Update... ");

format("ext4", "EMMC", "/dev/block/mmcblk0p14"); <--this is the culprit, I think

{ big snip of uninteresting script }

unmount("/system");

OP should note that RLS2.1 is not supposed to be standalone, it is supposed to be installed over RLS2. I had a similar error attempting to install RLS2.

OP should also note that there was probably additional information in his error message, which would have been useful to include.

The error message I got was that format() expects 5 args, got 3.

I did some looking for a reference to the scripting language. I found that it's called edify, and saw many guides and explanations, but nothing resembling a programmer's reference, and not really anything that a competent UNIX programmer wouldn't be able to guess by inspection. I did find some examples where format() is called with 5 args, and was tempted to just edit the script so that the line would be

Code:
format("ext4", "EMMC", "/dev/block/mmcblk0p14", "system", 0);
but chickened out, this being my first attempt to flash a ROM.

Evidently many people have been able to install these ROMs without this problem: how is it possible that something as basic as the required number of arguments to a filesystem formatting command could vary from device to device?

How should I proceed, if I want to get this installed?
Last edited by wades; 25th June 2014 at 05:38 PM.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes