Post Reply

[GUIDE][ROM][ROOTING][4.4.2] XOLO Q1010i with Screenshots

OP bgos10

27th June 2014, 08:28 AM   |  #1  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!

1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)

Downloads:

-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)

Instructions:

PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)

Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS

Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)

Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)

Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)

Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)

Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)

Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP

Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install

Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!

Note:

If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools

Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also

Credits:

Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Attached Thumbnails
Click image for larger version

Name:	Capture.PNG
Views:	1155
Size:	62.9 KB
ID:	2828874   Click image for larger version

Name:	Capture3.PNG
Views:	1228
Size:	48.8 KB
ID:	2828896   Click image for larger version

Name:	Capture4.PNG
Views:	1011
Size:	67.4 KB
ID:	2828897   Click image for larger version

Name:	Capture5.PNG
Views:	975
Size:	49.0 KB
ID:	2828898   Click image for larger version

Name:	Capture2.PNG
Views:	907
Size:	128.7 KB
ID:	2828904  

Click image for larger version

Name:	Capture6.PNG
Views:	865
Size:	50.2 KB
ID:	2828905   Click image for larger version

Name:	Capture7.PNG
Views:	860
Size:	63.3 KB
ID:	2828906   Click image for larger version

Name:	Capture8.PNG
Views:	904
Size:	50.0 KB
ID:	2828907  
Last edited by bgos10; 29th September 2014 at 08:11 PM.
The Following 10 Users Say Thank You to bgos10 For This Useful Post: [ View ]
27th June 2014, 08:29 AM   |  #2  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
Here's How ROOT and Flash Recovery on Your Phone Without Touching Your PC (Works ON JB ONLY!!!)

Instructions:

-Download and Install Framaroot( v1.9.1 Tested to be Working !!!) HERE

-Open The App and Select SuperSu from Dropdown Menu and press Bahahir,It'll be ROOTED!!!

-Download and Install Mobile Uncle tools From Play Store (HERE)

-Download CTR v2.2 Recovery.img (HERE) and place it in your SDCard Directly (Don't place it inside any Folder)

-Open Mobile Uncle Tools, Select Recovery update, Select Recovery.img From there, Press OK And Then Reboot into Recovery Mode !!!

DONE!!! You've Successfully Flashed Recovery on Your Device!!!

KK users follow this for Rooting without PC

https://docs.google.com/file/d/0BwbI...HRqa2s/preview
Last edited by bgos10; 6th October 2014 at 03:26 PM.
The Following 2 Users Say Thank You to bgos10 For This Useful Post: [ View ]
27th June 2014, 08:29 AM   |  #3  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
Flashing Q1010i (4.4.2-KitKat Stock ROM through Recovery
Here's HOW To Flash 4.4.2 Stock ROM Through Recovery (JB n KK)

Instructions

-Make Sure You've Flashed CTR Recovery on Your Device (See Post 1 & 2 for More Details)

-Download Flashable Zip of Stock 4.4.2 ROM from (HERE)
-Download SuperSu Zip from (Here)

-Place Both the Files in Your SD Card, Goto Recovery Mode

-In Recovery Mode Go To Install ---> Install from SD ----> Select the ROM File and press YES to Flash it and Do the Same for the SuperSu Zip after Flashing completes

-Reboot and Enjoy !!!

Credits:

Ritesh Nair for the Stock 4.4.2 Zip
Last edited by bgos10; 3rd July 2014 at 09:35 AM.
The Following 2 Users Say Thank You to bgos10 For This Useful Post: [ View ]
28th June 2014, 03:23 PM   |  #4  
Member
Thanks Meter: 22
 
79 posts
Join Date:Joined: Sep 2012
Download links
hi,
i have updated mine to kitkat and can not gain root access
can you upload the recovery and rom pls
28th June 2014, 06:09 PM   |  #5  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
HOW To Flash Stock ROM on Your Device Through SP TOOLS
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS

Requirements:

-SP TOOLS v5.1352.01 (DOWNLOAD HERE)

-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)

-MTK USB Drivers (HERE)

-A PC with Windows 7 or Later

Instructions:

-Download and Extract the Stock ROM you Downloaded Above

-Download and Install the MTK USB Drivers from Above

-Extract SP TOOLs and Run Flash_tool.exe

-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted

-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC

-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box

-Now Disconnect your Phone and Power it Up!!!!
Last edited by bgos10; 5th July 2014 at 06:13 AM.
The Following 3 Users Say Thank You to bgos10 For This Useful Post: [ View ]
2nd July 2014, 06:45 PM   |  #6  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
Thread Updated

Sent from my C2305 using Tapatalk
The Following User Says Thank You to bgos10 For This Useful Post: [ View ]
3rd July 2014, 09:43 AM   |  #7  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
Thread Updated !!!!
The Following User Says Thank You to bgos10 For This Useful Post: [ View ]
6th July 2014, 07:32 AM   |  #8  
Junior Member
Thanks Meter: 3
 
16 posts
Join Date:Joined: Dec 2013
Not working
Quote:
Originally Posted by bgos10

Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!

1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)

Downloads:

-MTK USB Drivers (HERE)
-MT6582 Scatter File (HERE)
-CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)

Instructions:

PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)

Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS

Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)

Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)

Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)

Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)

Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)

Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP

Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install

Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!

Credits:

Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools

I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?

---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------

Quote:
Originally Posted by bgos10

Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS

Requirements:

-SP TOOLS v5.1352.01 (DOWNLOAD HERE)

-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)

-MTK USB Drivers (HERE)

-A PC with Windows 7 or Later

Instructions:

-Download and Extract the Stock ROM you Downloaded Above

-Download and Install the MTK USB Drivers from Above

-Extract SP TOOLs and Run Flash_tool.exe

-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted

-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC

-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box

-Now Disconnect your Phone and Power it Up!!!!

So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
6th July 2014, 12:03 PM   |  #9  
bgos10's Avatar
OP Senior Member
Flag Gotham
Thanks Meter: 769
 
380 posts
Join Date:Joined: May 2013
Donate to Me
More
Quote:
Originally Posted by XenonTNT

I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?

---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------



So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.

4.4.2 is rooted, 4.2.2 is not

Sent from my C2305 using Tapatalk
The Following User Says Thank You to bgos10 For This Useful Post: [ View ]
6th July 2014, 02:40 PM   |  #10  
Junior Member
Thanks Meter: 3
 
16 posts
Join Date:Joined: Dec 2013
I got the fix while mobile is switch off we need to press volume up + power button after download button is pressed in sp tool to start downloading in mobile. Also to root on KitKat we need preloader file of kitkat also. So kindly upload it for other users I am downloading whole KitKat stock ROM.

The Following User Says Thank You to XenonTNT For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Q1010i Android Development by ThreadRank