{Ray}[DEV][KitKat 4.4.4][CM11.0] LegacyXperia
- Thread starter mikeioannina
- Start date
-
- Tags
- development
- Status
is the bug with the video player solved?
sorry for bad english
no --
---------- Post added at 01:00 PM ---------- Previous post was at 12:59 PM ----------
recomended gapps 4.4.4
but u can flash gapps 4.4.3 :highfive:
Last edited:
If you are dirty flashing, no need for gapps.
If you are clean flashing 443 and 444 gapps will work as the update from 443 to 444 was only a few security updates, which some 443 ROMs had already as they use some AOSP code.
Downloaded last version and my device dosn't boot
I have black screen after legacy xperia logo forever
anyone facing the same problem?
don't know how to make log, sorry
Note: my instllation process: -fomat system
- wipe cache and dalvik
- install rom and gapps
I have black screen after legacy xperia logo forever
anyone facing the same problem?
don't know how to make log, sorry
Note: my instllation process: -fomat system
- wipe cache and dalvik
- install rom and gapps
Last edited:
You say you did format /system, therefore I suggest you also format /data.
If you are already on a previous release of this ROM, there is no need to format anything, but if you do format, format all
which is basically the same as factory reset.I have got a question for mikeioannina or anybody else who can help - The LegacyXperia kernel doesn't boot when added to another ROM's sources.
I have downloaded LegacyXperia sources and the ROM builds perfectly fine. The kernel boots and everything else is as expected. But, when I put the kernel sources in another roms, Paranoid Android or CarbonRom, the kernel doesn't finish booting. I have made sure that the kernel sources are pointing to Github cm-11.0 branch. I have also compared the device/semc/urushi sources and those are identical to that of LegacyXperia sources. I am completely stuck here, been trying to figure out this mess myself since last 10 days or so, but no luck so far.
Here is the logcat. The logcat doesn't proceed after the last line but it's still running apparently. I have left the phone like 10 minutes and still the last line remains the same. Any help would be super helpful.
I have downloaded LegacyXperia sources and the ROM builds perfectly fine. The kernel boots and everything else is as expected. But, when I put the kernel sources in another roms, Paranoid Android or CarbonRom, the kernel doesn't finish booting. I have made sure that the kernel sources are pointing to Github cm-11.0 branch. I have also compared the device/semc/urushi sources and those are identical to that of LegacyXperia sources. I am completely stuck here, been trying to figure out this mess myself since last 10 days or so, but no luck so far.
Here is the logcat. The logcat doesn't proceed after the last line but it's still running apparently. I have left the phone like 10 minutes and still the last line remains the same. Any help would be super helpful.
Code:
I/clearpad_fwloader( 211): check_device_info: device.module_id = [0x02]
I/clearpad_fwloader( 211): check_device_info: revision = [0x07]
I/clearpad_fwloader( 211): check_nv_info: nv.module_id = [0x02]
I/clearpad_fwloader( 211): main_execution: Device is normal
I/clearpad_fwloader( 211): main_execution: Module ID is same
I/clearpad_fwloader( 211): compare_and_flush: Update of firmware is unnecessary
I/auditd ( 225): Starting up
--------- beginning of /dev/log/main
E/uim-sysfs( 224): uim: Inside main
E/uim-sysfs( 224): uim:ST built into the kernel ?
E/uim-sysfs( 224): uim:BT driver module un-available...
E/uim-sysfs( 224): uim:BT driver built into the kernel ?
E/uim-sysfs( 224): uim:FM driver module un-available...
E/uim-sysfs( 224): uim:FM driver built into the kernel ?
E/uim-sysfs( 224): uim:GPS driver module un-available...
E/uim-sysfs( 224): uim:GPS driver built into the kernel ?
E/uim-sysfs( 224): uim:FM V4L2 driver module un-available...
E/uim-sysfs( 224): uim:FM V4L2 driver built into the kernel ?
E/uim-sysfs( 224): uim:unable to chmod /dev/radio0, might not exist
E/uim-sysfs( 224): uim:found bluetooth rfkill entry @ 0
E/uim-sysfs( 224):
E/uim-sysfs( 224): uim:change mode failed for /sys/class/rfkill/rfkill0/state (1)
E/uim-sysfs( 224):
E/uim-sysfs( 224): uim:rfkill not enabled in st_drv - BT on from UI might fail
E/uim-sysfs( 224):
I/audit_log( 225): Previous audit logfile detected, rotating
I/AKMD2 ( 244): AK8975/B for Android v 2.0.0.---- (Library: v1.2.3.114) started.
I/installd( 240): installd firing up
I/nv_param_loader( 247): read_nv: NV value is active. nv_id=60240
I/nv_param_loader( 247): main_execution:prox_cal=0
W/libc ( 223): WARNING: generic atexit() called from legacy shared library
I/Vold ( 221): Vold 2.1 (the revenge) firing up
D/Vold ( 221): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 221): Volume usbdisk state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 221): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 221): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 1, PARTN 1
D/DirectVolume( 221): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 2, PARTN 2
D/DirectVolume( 221): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 3, PARTN 3
D/Vold ( 221): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Netd ( 226): Netd 1.0 starting
W/InterfaceController( 226): Warning (dlopen failed: library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
W/libc ( 223): WARNING: generic atexit() called from legacy shared library
W/libc ( 223): WARNING: generic atexit() called from legacy shared library
I/SurfaceFlinger( 231): SurfaceFlinger is starting
I/SurfaceFlinger( 231): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 231): loaded /vendor/lib/egl/libEGL_adreno.so
D/libEGL ( 231): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
D/libEGL ( 231): loaded /vendor/lib/egl/libGLESv2_adreno.so
W/Adreno-GSL( 231): <get_panel_settings:3802>: Android framework reported version 2. So, don't force ES30
I/Adreno-EGL( 231): <qeglDrvAPI_eglInitialize:381>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018_msm8960_KK_2.7_RB1_CL3869936_release_AU (CL3869936)
I/Adreno-EGL( 231): OpenGL ES Shader Compiler Version: 17.01.10.SPL
I/Adreno-EGL( 231): Build Date: 12/09/13 Mon
I/Adreno-EGL( 231): Local Branch: mybranch2092625
I/Adreno-EGL( 231): Remote Branch: quic/kk_2.7_rb1.15
I/Adreno-EGL( 231): Local Patches: NONE
I/Adreno-EGL( 231): Reconstruct Branch: AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018 + NOTHING
D/qdoverlay( 231): initoverlay:: opening the device:: /dev/graphics/fb0
D/qdoverlay( 231): initoverlay:: opening the device:: /dev/graphics/fb1
E/qdoverlay( 231): cannot open framebuffer(1)
W/qdcopybit( 231): open_copybit i = 0 surface_id=2
W/qdcopybit( 231): open_copybit i = 1 surface_id=3
W/qdcopybit( 231): open_copybit i = 2 surface_id=4
W/qdcopybit( 231): open_copybit i = 3 surface_id=5
W/qdcopybit( 231): open_copybit i = 4 surface_id=6
W/qdcopybit( 231): open_copybit i = 5 surface_id=7
W/qdcopybit( 231): open_copybit i = 6 surface_id=8
W/qdcopybit( 231): open_copybit i = 7 surface_id=9
W/qdcopybit( 231): open_copybit i = 8 surface_id=10
W/qdcopybit( 231): open_copybit i = 9 surface_id=11
W/qdcopybit( 231): open_copybit i = 10 surface_id=12
W/qdcopybit( 231): open_copybit i = 11 surface_id=13
W/qdcopybit( 231): open_copybit i = 12 surface_id=14
W/qdcopybit( 231): open_copybit i = 13 surface_id=15
W/qdcopybit( 231): open_copybit i = 14 surface_id=16
W/qdcopybit( 231): open_copybit i = 15 surface_id=17
W/qdcopybit( 231): open_copybit i = 16 surface_id=18
W/qdcopybit( 231): open_copybit i = 17 surface_id=19
W/qdcopybit( 231): open_copybit i = 18 surface_id=20
W/qdcopybit( 231): open_copybit i = 19 surface_id=21
W/qdcopybit( 231): open_copybit i = 20 surface_id=22
W/qdcopybit( 231): open_copybit i = 21 surface_id=23
W/qdcopybit( 231): open_copybit i = 22 surface_id=24
W/qdcopybit( 231): open_copybit i = 23 surface_id=25
W/qdcopybit( 231): open_copybit i = 24 surface_id=26
W/qdcopybit( 231): open_copybit i = 25 surface_id=27
W/qdcopybit( 231): open_copybit i = 26 surface_id=28
W/qdcopybit( 231): open_copybit i = 27 surface_id=29
W/qdcopybit( 231): open_copybit i = 28 surface_id=30
W/qdcopybit( 231): open_copybit i = 29 surface_id=31
W/qdcopybit( 231): open_copybit i = 30 surface_id=32
W/qdcopybit( 231): open_copybit i = 31 surface_id=33
W/qdcopybit( 231): open_copybit: 2 Plane YUV i=0 surface_id=35
W/qdcopybit( 231): open_copybit: 2 Plane YUV i=1 surface_id=36
W/qdcopybit( 231): open_copybit: 2 Plane YUV i=2 surface_id=37
W/qdcopybit( 231): open_copybit: 2 Plane YUV i=3 surface_id=38
W/qdcopybit( 231): open_copybit: 3 Plane YUV i=0 surface_id=40
I/qdhwcomposer( 231): Initializing Qualcomm Hardware Composer
I/qdhwcomposer( 231): MDP version: 400
D/qdhwcomposer( 231): connectPPDaemon: CABL is disabled
I/SurfaceFlinger( 231): Using composer version 1.3
I/qdhwcomposer( 231): hwc_registerProcs
I/qdhwcomposer( 231): Initializing UEVENT Thread
I/qdhwcomposer( 231): Initializing VSYNC Thread
D/qdhwcomposer( 231): hwc_getDisplayAttributes disp = 0, width = 480
D/qdhwcomposer( 231): hwc_getDisplayAttributes disp = 0, height = 854
I/SurfaceFlinger( 231): EGL informations:
I/SurfaceFlinger( 231): vendor : Android
I/SurfaceFlinger( 231): version : 1.4 Android META-EGL
I/SurfaceFlinger( 231): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable
I/SurfaceFlinger( 231): Client API: OpenGL_ES
I/SurfaceFlinger( 231): EGLSurface: 8-8-8-8, config=0x5
I/SurfaceFlinger( 231): OpenGL ES informations:
I/SurfaceFlinger( 231): vendor : Qualcomm
I/SurfaceFlinger( 231): renderer : Adreno (TM) 205
I/SurfaceFlinger( 231): version : OpenGL ES 2.0 V@45.0 AU@04.04.00.007.018 (CL@3869936)
I/SurfaceFlinger( 231): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_discard_framebuffer GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_depth_texture_cube_map GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_AMD_compressed_3DC_texture GL_EXT_texture_filt
I/SurfaceFlinger( 231): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 231): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 231): Error opening trace file: No such file or directory (2)
D/SurfaceFlinger( 231): Screen acquired, type=0 flinger=0x1333450
D/qdhwcomposer( 231): hwc_blank: Unblanking display: 0
D/qdhwcomposer( 231): hwc_blank: Done unblanking display: 0
I/mediaserver( 234): ServiceManager: 0x19c84f0
I/AudioFlinger( 234): Using default 3000 mSec as standby time.
E/MediaPlayerFactory( 234): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 234): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 234): registering DASH Player factory...
I/CameraService( 234): CameraService started (pid=234)
I/CameraService( 234): Loaded "Xperia msm7x30 Camera Wrapper" camera module
E/SEMC Camera HAL( 234): HAL_getNumberOfCameras: E
D/qdutils ( 231): DEBUG_CALC_FPS: 0
D/qdutils ( 231): period: 10
D/qdutils ( 231): ignorethresh_us: 500000
I/DEBUG ( 228): debuggerd: Jun 20 2014 01:03:11
D/libEGL ( 330): loaded /vendor/lib/egl/libEGL_adreno.so
D/libEGL ( 330): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
D/libEGL ( 330): loaded /vendor/lib/egl/libGLESv2_adreno.so
W/Adreno-GSL( 330): <get_panel_settings:3802>: Android framework reported version 2. So, don't force ES30
I/Adreno-EGL( 330): <qeglDrvAPI_eglInitialize:381>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018_msm8960_KK_2.7_RB1_CL3869936_release_AU (CL3869936)
I/Adreno-EGL( 330): OpenGL ES Shader Compiler Version: 17.01.10.SPL
I/Adreno-EGL( 330): Build Date: 12/09/13 Mon
I/Adreno-EGL( 330): Local Branch: mybranch2092625
I/Adreno-EGL( 330): Remote Branch: quic/kk_2.7_rb1.15
I/Adreno-EGL( 330): Local Patches: NONE
I/Adreno-EGL( 330): Reconstruct Branch: AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018 + NOTHING
E/cutils-trace( 330): Error opening trace file: No such file or directory (2)
D/AndroidRuntime( 232):
D/AndroidRuntime( 232): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
D/AndroidRuntime( 232): CheckJNI is OFF
I/dalvikvm( 232): DexOpt: not all deps represented
D/dalvikvm( 232): ODEX file is stale or bad; removing and retrying (/data/dalvik-cache/system@framework@qcmediaplayer.jar@classes.dex)
D/dalvikvm( 232): DexOpt: --- BEGIN 'qcmediaplayer.jar' (bootstrap=1) ---
D/dalvikvm( 386): DexOpt: sleeping on flock(/data/dalvik-cache/system@framework@qcmediaplayer.jar@classes.dex)
I/AudioPolicyManagerBase( 234): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
D/AudioHardware7x30( 234): msm_mixer_open: Opening the device
D/AudioHardware7x30( 234): msm_mixer_count:mixer_cnt =46
I/AudioHardware7x30( 234): ******* name[0] = [handset_rx] *********
I/AudioHardware7x30( 234): ******* name[1] = [handset_tx] *********
I/AudioHardware7x30( 234): ******* name[2] = [headset_stereo_rx] *********
I/AudioHardware7x30( 234): ******* name[3] = [headset_mono_rx] *********
I/AudioHardware7x30( 234): ******* name[4] = [headset_mono_tx] *********
I/AudioHardware7x30( 234): ******* name[5] = [fmradio_handset_rx] *********
I/AudioHardware7x30( 234): ******* name[6] = [speaker_stereo_rx] *********
I/AudioHardware7x30( 234): ******* name[7] = [fmradio_speaker_rx] *********
I/AudioHardware7x30( 234): ******* name[8] = [fmradio_headset_rx] *********
I/AudioHardware7x30( 234): ******* name[9] = [handset_dual_mic_endfire_tx] *********
I/AudioHardware7x30( 234): ******* name[10] = [handset_dual_mic_broadside_tx] *********
I/AudioHardware7x30( 234): ******* name[11] = [speaker_dual_mic_endfire_tx] *********
I/AudioHardware7x30( 234): ******* name[12] = [speaker_mono_tx] *********
I/AudioHardware7x30( 234): ******* name[13] = [tty_headset_mono_rx] *********
I/AudioHardware7x30( 234): ******* name[14] = [tty_headset_mono_tx] *********
I/AudioHardware7x30( 234): ******* name[15] = [bt_sco_rx] *********
I/AudioHardware7x30( 234): ******* name[16] = [bt_sco_tx] *********
I/AudioHardware7x30( 234): ******* name[17] = [speaker_mono_rx] *********
I/AudioHardware7x30( 234): ******* name[18] = [headset_speaker_mono_rx] *********
I/AudioHardware7x30( 234): ******* name[19] = [ringtone_speaker_stereo_rx] *********
I/AudioHardware7x30( 234): ******* name[20] = [ringtone_speaker_mono_rx] *********
I/AudioHardware7x30( 234): ******* name[21] = [bt_carkit_rx] *********
I/AudioHardware7x30( 234): ******* name[22] = [bt_carkit_tx] *********
I/AudioHardware7x30( 234): ******* name[23] = [bt_dsp_sco_rx] *********
I/AudioHardware7x30( 234): ******* name[24] = [bt_dsp_sco_tx] *********
I/AudioHardware7x30( 234): ******* name[25] = [handset_spkr_hac_rx] *********
I/AudioHardware7x30( 234): ******* name[26] = [headphone_mic_tx] *********
I/AudioHardware7x30( 234): ******* name[27] = [headset_stereo_speaker_stereo_rx] *********
I/AudioHardware7x30( 234): ******* name[28] = [hdmi_stereo_rx] *********
I/AudioHardware7x30( 234): ******* name[29] = [fmradio_stereo_tx] *********
I/AudioHardware7x30( 234): ******* name[30] = [headphone_mic_endfire_tx] *********
I/AudioHardware7x30( 234): ******* name[31] = [speaker_secondary_mic_tx] *********
I/AudioHardware7x30( 234): ******* name[32] = [speaker_dual_mic_endfire_tx_real_stereo] *********
I/AudioHardware7x30( 234): Set master volume to 7.
I/AudioFlinger( 234): loadHwModule() Loaded primary audio interface from QCOM Audio HW HAL (audio) handle 1
D/AudioHardware7x30( 234): AudioHardware::openOutputStream devices 2 format 1 channels 3 samplerate 44100
I/AudioFlinger( 234): HAL output buffer size 1200 frames, normal mix buffer size 1200 frames
I/AudioMixer( 234): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
I/AudioFlinger( 234): Using module 1 has the primary audio interface
D/AudioHardwareInterface( 234): setMode(NORMAL)
D/AudioPolicyManagerBase( 234): setOutputDevice() changing device from (2) to (2) force (1) delayMs (0) on Output (2)
I/AudioFlinger( 234): AudioFlinger's thread 0x41412008 ready to run
W/AudioFlinger( 234): Thread AudioOut_2 cannot connect to the power manager service
I/AudioHardware7x30( 234): Routing audio to Speakerphone
D/AudioHardware7x30( 234): new_rx = 17
D/AudioHardware7x30( 234): new_tx = 12
W/AudioFlinger( 234): Thread AudioOut_2 cannot connect to the power manager service
D/AudioHardware7x30( 234): setVoiceVolume(0.000000)
I/AudioHardware7x30( 234): Setting in-call volume to 0 (available range is 0 to 100)
E/AudioHardware7x30( 234): msm_set_voice_rx_vol(0) failed errno = 1
W/AudioFlinger( 234): Thread AudioOut_2 cannot connect to the power manager service
E/AudioFlinger( 234): no wake lock to update!
I/audio_a2dp_hw( 234): adev_open: adev_open in A2dp_hw module
I/AudioFlinger( 234): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger( 234): loadHwModule() Loaded usb audio interface from USB audio HW HAL (audio) handle 4
I/AudioPolicyService( 234): Loaded audio policy from QCOM Audio Policy HAL (audio_policy)
V/NatController( 226): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController( 226): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController( 226): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController( 226): runCmd(/system/bin/ip route flush cache) res=0
V/NatController( 226): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=1
V/NatController( 226): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=1
V/NatController( 226): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
W/libc ( 229): WARNING: generic atexit() called from legacy shared library
D/MDnsDS ( 226): MDnsSdListener::Hander starting up
D/MDnsDS ( 226): MDnsSdListener starting to monitor
D/MDnsDS ( 226): Going to poll with pollCount 1
Last edited:
You may find my response a bit offensive but here it goes:
Since you are asking this question, I am assuming that you can read as well.
The OP clearly explains (even step by step for a person with an IQ<20) what needs to be done to get the phone up and running. Just read before posting useless questions which makes people read and waste their time by firing off furious responses.
Sent from my HTC One mini using Tapatalk
Where can I download the kernel?
The root folder of the ROM zip file has the kernel: boot.img
I had the same problem since last 4-5 days. I was on Carbon ROM but I think the steps will be same. What I did:
1. Used Banks minimal gapps package - http://www.androidfilehost.com/?w=files&flid=15769 (7-2_GApps_Minimal_4.4.4_signed.zip)
2. Compiled ROM with latest sources. There was one specific commit that disabled the gms or some other package receiver that was causing battery drain, can't recollect what it was.
3. Disabled option "wake on notifications" from lockscreen settings. (This may not be available in LX).
Last edited:
this is weird. after several reboots. deep sleep worked again... sometimes this bug appears again and disappears after 1 or 2 reboots.
I also saw some people report this bug in bug tracker so maybe mike will fix it. till then I'll keep rebooting because can't build from source due to broken pc.
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
124
Code:[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR] [COLOR="Navy"]/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */[/COLOR]
This is an unofficial build of CM11.0.
This is an attempt to stay close to official cm11.0 and not make crazy hacks to make things working.
This is a pure CM build, only contains official CM features. I will not add any other external feature/app/etc.
For an up-to date working/not working list, bug tracker, useful guides & FAQ, visit our website:
http://legacyxperia.github.io
WARNING: This ROM uses a modified internal memory layout.
Our /system partition is originally 400MB but this space is not enough for a fluid kitkat experience and a full installation with proper google apps.
Our /cache partition is also too small to fit art-cache when we enable the ART runtime. We originally had 100MB /cache but art-cache needs ~150mb of free space.
I have repartitioned the internal memory layout, giving:
450mb in /system
469,5mb in /data
8mb in /cache
If you want to use this ROM you will always have to use the included kernel or use a kernel that includes the layour changes. Bug reports with non-standard kernels will be ignored.
You will have to wipe the device and make a clean install.
You cannot restore nandroid backups from previous android versions or restore nandroid backups from this ROM to other ROMs that don't use the new partition layout since you risk corrupting the data.
I suggest to use Titanium Backup, Helium or any other similar app to backup your data if you really need to.
Requirements:
* Have the stock ICS 4.1.B.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
* LT15i (Arc) users need to flash LT18i (Arc S) ftf
* MT15i (Neo) users need to flash MT11i (Neo V) ftf
Steps required for correct installation (order is important):
1: Flash boot.img in fastboot & reboot into recovery
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
2: Enter recovery, go to mounts and storage
3: Format /system, then /data and then /cache (Important step!)
4: Flash update zip
5: Flash gapps (recommended package is the one provided in the link below)
Steps 1.1, 2 & 3 are not needed when you install new cm11 nightlies on top of older cm11 builds in the future
If you want to return to a ROM that doesn't use the new partition layout, you need to follow the above steps again (only replace boot.img & update zip with the ones you want to use).
How to build:
[GUIDE][DEV] How I build my own CM11.0 test builds
Changelog:
Release/nightly changes
Working/Non-working list
CM11.0 with new kernel 3.4 status
Downloads:
https://s.basketbuild.com/devs/LegacyXperia
PLEASE DON'T MIRROR OUR UPLOADS
Recommended Google Apps:
Google Apps Minimal Edition
NOTE:
Following xda's rule #12 spirit: If you are developing something that is based on my work, you MUST first seek my permission, you must add my name in the credits and you must add links pointing to my original thread and to my github sources.
Breaking this rule will lead me to report the thread to the moderators.
NEW!!! BUG Tracker
If you want to help fixing those bugs, please report the bugs in the bug tracker. Thanks!
Logs are needed (logcat/dmesg/last_kmsg), not just "got FC" or "+1" useless replies.
XDA:DevDB Information
LegacyXperia, ROM for the Sony Ericsson Xperia Mini, Mini Pro, Active
Contributors
mikeioannina, nobodyAtall, pcfighter, Blefish
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest version of official ICS firmware: 4.1.B.0.587 or the latest supported baseband: 8x55A-AAABQOAZM-203028G-77
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: nightly 20140702
Beta Release Date: 2014-07-02
Created 2013-11-27
Last Updated 2014-09-0634## Alpha build 20131127 - cm-11.0
* Latest cm11.0 changes
* Initial KitKat 4.4 build
Builds will roll alphabetically for all devices until tomorrow
Please do not spam the thread with "thanks" posts.
Only use the thread for development discussion, anything else belongs to the Q&A thread.32New build coming - READ THE WHOLE POST
## Alpha 2 build 20131210 - cm-11.0
* Latest cm11.0 changes
* Updated to android 4.4.1
* Repartitioned internal memory layout
* Fixes:
- Battery indicator alignment
- PIN/PUK layout
- Lockscreen clock layout
- Camera flash in photo mode (urushi)
- Music distortion on lock/unlock sounds
- Disable back key on incoming call
- Gesture typing
* Many bugfixes from CM upstream
* Many bugfixes/small features ported from cm10.1/cm10.2
* Features:
- APN Settings
- Mass storage settings
- DeskClock: Add increasing volume option for alarm clocks
- DeskClock: Profile support
- DeskClock: Add back user-defined world cities
- "Clear all" button on recent apps
- Hardware key settings
- Lockscreen shortcut configuration
- 2G/3G toggle
- Circle battery
- Battery with percentage
- Noise suppression
- Allow some customization in Launcher
- Add cLock settings back to lockscreen settings
- Allow configuration of wake on plug behavior
- Allow configuration of country code for wifi
- Display rotation settings
- WhisperPush secure messaging
* Temporarily disabled low ram config to enable 4.4 UI features
* Disabled animated bootlogo to free some /boot partition space
* Added all resolutions in camera
* Enabled Performance Profiles
* Enabled zRAM by default
* Testing a SYM key change on mango & iyokan
Builds will roll alphabetically for all devices until tomorrow
Gapps package is also updated, please redownload it.
WARNING: This update introduces a modified internal memory layout.
Our /system partition is originally 400MB but this space is not enough for a fluid kitkat experience and a full installation with proper google apps.
Our /cache partition is also too small to fit art-cache when we enable the ART runtime. We originally had 100MB /cache but art-cache needs ~150mb of free space.
I have repartitioned the internal memory layout, giving:
450mb in /system
469,5mb in /data
8mb in /cache
dalvik-cache/art-cache is now stored in /data partition
We still have to use the lite gapps that are provided in LX basketbuild folder.
If you want to use this ROM you will always have to use the included kernel or use a kernel that includes the layour changes. Bug reports with non-standard kernels will be ignored.
You will have to wipe the device and make a clean install.
You cannot restore previous nandroid backups or restore nandroid backups from this ROM to other ROMs that don't use the new partition layout since you risk corrupting the data.
I suggest to use Titanium Backup, Helium or any other similar app to backup your data if you really need to.
A note to other devs that use LX as a base to their KitKat ROMs: If you decide to modify the partition layout, please use the same layout in your kernel so people will be able to backup/restore nandroid backups between 4.4 ROMs and they won't need to wipe the whole device when they switch between 4.4 ROMs.
Requirements for the new partition layout:
* Have the stock ICS 4.1.B.0.587 full ftf flashed (doesn't matter if you have flashed it in the past or if you flash it before installing cm11.0, it will work both ways)
* LT15i (Arc) users need to flash LT18i (Arc S) ftf
* MT15i (Neo) users need to flash MT11i (Neo V) ftf
Steps required for correct installation (order is important):
1: Flash boot.img in fastboot & reboot into recovery
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
2: Enter recovery, go to mounts and storage
3: Format /system, then /data and then /cache (Important step!)
4: Flash update zip
5: Flash gapps
If you want to return to a ROM that doesn't use the new partition layout, you need to follow the above steps again (only replace boot.img & update zip with the ones you want to use).
Only use the thread for development discussion, anything else belongs to the Q&A thread.29Thread closed
Since people don't learn how to read, I can't handle this situation anymore.
I come in the thread and instead of finding something useful, there are only the same posts repeated again and again, ignoring my posts and xda rules.
Thread locked until further notice.29New build coming
## Nightly build 20140531 - cm-11.0
* Latest cm11.0 changes
* Fixed SystemUI crashes, lockups & soft reboots
* Updated kitkat adreno GPU libs from Galaxy S3 (d2lte) (Tag AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018)
* Updated BFQ IO scheduler to v7r3
* Fixed several kernel security vulnerabilities (CVE-2014-0196, CVE-2014-3145, CVE-2014-3144, CVE-2014-3122, CVE-2014-2851, CVE-2014-2523)
* Bumped mic & speaker volumes to nAa kernel level
* Make ION MM heap use CMA: makes ~26MB of RAM available to userspace when not used by video encoder/decoder
* Make PMEM_ADSP heap use fmem: makes ~47MB on devices with 8MP camera or ~31MB on devices with 5MP camera available to userspace when not used by camcorder
* Rebased kernel on top of latest CAF kk_2.7-stable changes
* Testing fix for media storage crashes after hot reboot
* Updated KSM for better power consumption
Builds will roll alphabetically for all devices until tomorrow