[GUIDE] Unbrick Soft-Brick Galaxy Note Pro 12.2 SM-P901 (XXUANAG)
This Guide Can be Used For Galaxy Note Pro 12.2 SM-P901 / DON’T Flashing Them On Other Variants.
Full Unroot / Unbrick To Official XXUANAG
Before Process Make Sure
1.-Installed USB drivers on your PC (Like KIES 3.x
2-Your Device Should have 50% Charge Remaining.
3-Backup Your Important Data (Data Stored in Internal Memory) Data Will Wiped After Full Flashed
How to do it:
1-Turn OFF Your Device And Go to Download Mode by Pressing and Holding the Volume Down + Power Button Then Proceed With Volume up.
2-Now open ODIN and Connect your Device to Your PC.
3-Once your phone is Connected to your PC (ID:COM on ODIN Will Turn Blue/Yellow) and Show the COM Port Number
4-Unzip the Downloaded Firmware (You Will Get 4 Files .MD5)
5-Click AP / CP / BL / CSC Like Firmware
6-Check "Auto Reboot" and "F. Reset Time" Options and Make Sure that "Re-Partition" & "NAND Erase All" is Unchecked
7-Click on Start Button in ODIN To Flashing Process. The process will take few minutes to complete
8-When the Installation is Completed in ODIN "Reset " Then a "Pass". Your phone will restart First boot will Take a longer Time (3mn-10mn)