Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,781,851 Members 46,488 Now Online
XDA Developers Android and Mobile Development Forum

[Solved!] Zopo C2 Hard Bricked

Tip us?
 
iamdoki
Old
#1  
Junior Member - OP
Thanks Meter 1
Posts: 3
Join Date: May 2014
Talking [Solved!] Zopo C2 Hard Bricked

Hi Guys!

If you hard bricked your Zopo C2, don't panic! Fortunately, the MTK chipset is not easy to kill!
I brought you the solution!

First of all! Calm down, drink a cup of coffee or a cold beer, smoke a cigarette, and follow these steps:

1. Download files from the attachments!
What you will need:
- The Flashtool MTK Driver.rar
- SP Flash Tool, use this version!!!
- The correct preloader (you found A and B version, download which you need)

2. Unrar these files to separate folders.

3. Install the Flashtool MTK driver as administrator!

4. Open the SP Flashtool as Administrator!

5. Open the scatter file (the preloader which you downloaded at step 1.) These file only contain the preloader, not the ROM!

6. Click the Download icon, and connect your USB cable to your computer and your Phone. Don't take out the battery!

If you follow these easy steps, the program goes to the green ring on, and your phone is ready to wake up!
Attached Files
File Type: rar FlashTool MTK Driver.rar - [Click for QR Code] (339.4 KB, 133 views)
File Type: rar preloader_a.rar - [Click for QR Code] (57.6 KB, 94 views)
File Type: rar preloader_b.rar - [Click for QR Code] (58.8 KB, 101 views)
File Type: 7z SP_Flash_Tool_Correct.7z - [Click for QR Code] (3.18 MB, 146 views)
The Following User Says Thank You to iamdoki For This Useful Post: [ Click to Expand ]
 
degogar
Old
#2  
Member
Thanks Meter 0
Posts: 74
Join Date: Apr 2007
Talking Bricked C2 ?

my zopo c2 bricked, or semi-bricked.
Upgrading to latest rom from Zopo shop it flashed ok
Then I decided to press the firmware upgrade button, and it immediately started flashing the rom, about 4 min later the green circle appears on the pc screen. I remove the usb cable and tried to power on the device, nothing happened.
Also downloaded a few zopo zp980 roms, but there's no way to get red of the error message, the flash bar only gets red and then it stops.

Until now I've tried to upgrade or download but the same error message appears on the screen I don't know what to do with this brick.....
BDROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) with flash tool.
going to try your method hopefully it will work


[IMG]http://i314.photobucket.com/albums/ll405/Derekgarn/Screenshot2014-07-26123309_zps9e2cff0b.png[/IMG


---------- Post added at 01:37 PM ---------- Previous post was at 01:15 PM ----------

Thanks it worked perfectly now have a phone again
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes