Build Custom Stock Kernel with Linaro GCC 4.9.1

With this guide for Sony devices, you will learn how to build a kernel using the Linaro … more

What’s Your Biggest Reason for Not Owning an iPhone?

With XDA being a community of Android enthusiasts, it is not uncommon to see … more

“New Kernel” for OnePlus One

If you are hungry for a new kernel on your OnePlus One, XDA Senior Member jgcaap‘s … more

GMD GestureControl Gets Lollipop Support

GMD GestureControl is an app that allows you to control your (rooted) devices with multitouch … more
Post Reply Subscribe to Thread Email Thread

Moko Case finally available for TF701 on Amazon

6th January 2014, 08:01 PM |#1  
Aaroneious's Avatar
OP Member
Flag California - USA
Thanks Meter: 25
76 posts
Join Date:Joined: May 2013
Donate to Me
At least in the US there is finally some movement in the accessory market for the TF701. There is a Moko case available for $20.00 and eligible for Prime! Hopefully there will be some aftermarket chargers/cables soon.
14th January 2014, 06:58 PM |#2  
Flag Austin
Thanks Meter: 1
75 posts
Join Date:Joined: Sep 2010
Mine's coming thursday. This thing is too big to risk an unprotected drop.
18th January 2014, 12:21 AM |#3  
Senior Member
Thanks Meter: 7
124 posts
Join Date:Joined: Dec 2010
Thoughts on the MOKO
Originally Posted by lbp102

Mine's coming thursday. This thing is too big to risk an unprotected drop.

I purchased two, for the two 701's in my family. The exterior look was very good. The stitching neat and even. The case is very light, and does not add too much to the size, and heft of the tablet. Every hole lined up as they should, though the camera hole on the back is close. The flap that keeps the tablet in also tends to get caught on its velco. I recommend putting a piece of paper against the velcro, then insert the tablet and the flap as far as you can into the pocket, and then remove the paper. This will ensure that your "baby" is well positioned into the pocket, and thus aligned better for the holes.

The only negative is that on both cases, the interior "felt" surfaces were not very well glued to the case. The result was very unsightly wrinkles in the felt in both of the cases. Nothing functionally wrong with it. Just very unsightly.

Still, worth purchasing, and of note is the hole in the case that allows you to charge the tablet while the case is closed.

Update: After a few months of average use, the facing is splitting. The area on the left, where my thumb rests when in landscape mode has split. Very disappointing in an otherwise great case.
Last edited by Reggie777; 30th July 2014 at 04:46 AM. Reason: Update: Coming apart...
18th January 2014, 04:44 AM |#4  
Senior Member
Thanks Meter: 433
1,938 posts
Join Date:Joined: Jan 2011
god damn where is that Transcover
13th April 2014, 08:09 AM |#5  
SonjaMichelle's Avatar
Flag Jacksonville Beach
Thanks Meter: 7
53 posts
Join Date:Joined: Apr 2014
I purchased the Moko case from Amazon for my TF701T as well. The fit is near perfect. Construction is decent. The feel is not cheap. The accessory pockets are a nice touch to carry biz cards, id, stylus and a misc document or two. Overall not a bad buy for $20.
13th April 2014, 07:09 PM |#6  
YayYouFixedIt's Avatar
Senior Member
Thanks Meter: 64
538 posts
Join Date:Joined: Nov 2012
Looks nice. This one has been handy for me.

Im looking at getting some kind of gooseneck tablet holder as well.

Something like this.

But Im not sure which one is good.

One with an arm
Last edited by YayYouFixedIt; 13th April 2014 at 07:13 PM.
28th July 2014, 01:26 PM |#7  
Junior Member
Flag Fort Riley
Thanks Meter: 0
8 posts
Join Date:Joined: Jul 2014
Car holders
I have seen a few rolling around the EU side of Ebay. Headrest adapters, and window suction cup holders to use a nav panel I imagine.
I'm still new to the site, so I can't post links until I hit 10 posts. :/

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes