Charging Test 4 Yadli Kernel while measuring
using 402 Rom with Yadli Kernel v3
Charging via Sony Wallcharger that came with the phone: 1.5A
USB cable cut open and put a Log tool(Digital Multimeter + Digital Camera) between to measure the current, then USB to Micro USB cable.
Charging time from 0% to 100% = 7 hours
Trepn Log Screenshot
(Camera stopped taking pictures after 260 Minutes, thats why the Charging Current doesn't go till 450 Minutes)
And in Numbers:
I'm NOT sure if it's because of a bad USB cable (Did NOT yet do a test just with the additional Cable....) or the digital Multimeter, but the Current is limited to 480mA which results in a 7hour charging duration.
I put my Canon ESO500D with Magic Lantern on intervalometer and made a picture every Minute, sadly after 260 minutes something failed and it didn't continue to take pictures
(Nope, was not the battery....) Thats sad because it was constant 4.8 during the whole 260 Fotos i made! maybe when reaching 96% that could have changed.... maybe...
so the next test will be Cables only, trying to fix the cut USB cable and charge the phone again tonight, if it takes 7hours again it's because of the Cable, if it takes 3 hours it's because of the digital Multimeter inbetween.