Post Reply

Zopo 4.4.4 miui glitters XOLO Q3000 in its Aroma loop

OP puduraja

7th May 2014, 01:27 PM   |  #1  
puduraja's Avatar
OP Senior Member
Flag Chennai, India
Thanks Meter: 174
 
252 posts
Join Date:Joined: Jun 2012
More
Dear XOLO Q3000 Users,

I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.

Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8...it?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.

Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.

For any doubts and other problems write here.
Last edited by puduraja; 7th May 2014 at 01:31 PM.
The Following 4 Users Say Thank You to puduraja For This Useful Post: [ View ]
13th May 2014, 05:20 PM   |  #2  
Senior Member
Flag Chandigarh
Thanks Meter: 18
 
142 posts
Join Date:Joined: Mar 2008
More
Thumbs up
Quote:
Originally Posted by puduraja

Dear XOLO Q3000 Users,

I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.

Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8...it?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.

Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.

For any doubts and other problems write here.

thanks a lot
will give a try n let u know abt performance n any other things
The Following 2 Users Say Thank You to drlalitbida For This Useful Post: [ View ]
31st July 2014, 01:30 PM   |  #3  
rufus.reynolds's Avatar
Senior Member
Flag Mumbai
Thanks Meter: 75
 
139 posts
Join Date:Joined: Jun 2013
More
Downloaded...Flashed...Bricked...Recovered.
Last edited by rufus.reynolds; 31st July 2014 at 10:12 PM.
The Following User Says Thank You to rufus.reynolds For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Q3000 Android Development by ThreadRank