Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

i605 verizone galaxy note 2 unbricker

OP KOBOL

9th August 2014, 07:05 PM   |  #81  
OP Member
Thanks Meter: 25
 
55 posts
Join Date:Joined: Dec 2006
Quote:
Originally Posted by Ahh-sh!t

So, this is my first time posting hopefully I'm doing this right lol

ok, so I have this i605 note 2 that had VRALJB I believe, this phone was soft bricked by a customer not me. but i managed to get it up and

running using root66_VZW_stock_system.tar but later soft bricked again. Ive tried ODIN using boot-stock-aljb-SCHI605 which it took but would

always get stuck at the Samsung logo and cant enter "recovery" but will enter 'download mode'. So I ended up here, I did the resistor jump with

my own twist using an IPAD home button. when I use the VRALJB unbricker nothing just a blank screen. So I tried MJ9 unbricker which gave

the "SDCARD MODE" I press volume down and "APMB: INVALID APMB DATA". Is the VRALJB unbricker corrupted ? can some one upload a

new or can some one show me how to make my own boot.img. Any help would be awesome been at this for 2 weeks now and im at a loss.

I have images if you need them wont let me post outside links since im a "noob"


if your phone boot on samsung logo then boitloader is fine, somthing other is corupted. this unbrickers tested by me
10th August 2014, 12:55 AM   |  #82  
Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Aug 2014
Cant load VRALJB Sd-UnBrick .img
Device no longer boots it is hard bricked now, I have tried VRALJB unbricker (old bootloader) i605 unbrick sdcard.rar. Image does not load just a blank screen. Using i605 MJ9 unbricker.rar yields this error "APMB: INVALID APMB DATA". So were to now? Am I out of options here since there are only two files and one of them "no boot" and the other has an "ERROR". Thanks
10th August 2014, 05:48 AM   |  #83  
Senior Member
Flag Kalamazoo
Thanks Meter: 41
 
125 posts
Join Date:Joined: Jul 2010
More
Quote:
Originally Posted by Ahh-sh!t

Device no longer boots it is hard bricked now, I have tried VRALJB unbricker (old bootloader) i605 unbrick sdcard.rar. Image does not load just a blank screen. Using i605 MJ9 unbricker.rar yields this error "APMB: INVALID APMB DATA". So were to now? Am I out of options here since there are only two files and one of them "no boot" and the other has an "ERROR". Thanks

check out the alternative method in my signature
10th August 2014, 09:01 AM   |  #84  
OP Member
Thanks Meter: 25
 
55 posts
Join Date:Joined: Dec 2006
Quote:
Originally Posted by Ahh-sh!t

Device no longer boots it is hard bricked now, I have tried VRALJB unbricker (old bootloader) i605 unbrick sdcard.rar. Image does not load just a blank screen. Using i605 MJ9 unbricker.rar yields this error "APMB: INVALID APMB DATA". So were to now? Am I out of options here since there are only two files and one of them "no boot" and the other has an "ERROR". Thanks


check resistor, i think u doo somthing wrong. i have test this unbricker and it's work fine
13th August 2014, 01:29 AM   |  #85  
Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Aug 2014
Cant load VRALJB Sd-UnBrick .img
I soldered this using a microscope and verified my connection and they work with MJ9 unbricker.rar. Unsuccessful booting up VRALJB unbricker, just a blank screen. I am very well rehearsed in surface mount soldering and board level type repairs.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes