Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,778,543 Members 37,664 Now Online
XDA Developers Android and Mobile Development Forum

[ROM][4.4.2][V500][Flashable] Stock LG Leaked Build KOT49I.V50018a + BusyBox + Root

Tip us?
 
LBJM
Old
#191  
Senior Member
Thanks Meter 37
Posts: 322
Join Date: Feb 2011
Quote:
Originally Posted by meanoc View Post
How would I go about doing that?
There are a number of ways the easiest is to download one of the 20a/20b build you want to flash. Then flash the zip file and after that is done DO not reboot yet. Next flash the kernel you want and reboot. I've attached the 18a kernel all I did was borrow a zip from Demetris' kernel and then replace the kernel he had in the file with the 18a kernel, so his script might say GPE-ish kernel but it will flash the 18a kernel (I forget what it says). When you reboot you should notice the better gamma setting. The version number of the kernel will stay the same LG was sneaky like that.

https://www.dropbox.com/s/h1651qow98....18akernel.zip
The Following User Says Thank You to LBJM For This Useful Post: [ Click to Expand ]
 
meanoc
Old
#192  
Senior Member
Thanks Meter 23
Posts: 143
Join Date: Feb 2014
Quote:
Originally Posted by LBJM View Post
There are a number of ways the easiest is to download one of the 20a/20b build you want to flash. Then flash the zip file and after that is done DO not reboot yet. Next flash the kernel you want and reboot. I've attached the 18a kernel all I did was borrow a zip from Demetris' kernel and then replace the kernel he had in the file with the 18a kernel, so his script might say GPE-ish kernel but it will flash the 18a kernel (I forget what it says). When you reboot you should notice the better gamma setting. The version number of the kernel will stay the same LG was sneaky like that.

https://www.dropbox.com/s/h1651qow98....18akernel.zip
Thanks so much for the info
 
Canadoc
Old
#193  
Senior Member
Thanks Meter 101
Posts: 1,661
Join Date: Nov 2010
When I tried flashing the 18 kernel it darkened the screen until locking and unlocking the screen

Sent from my SM-N900W8 using Tapatalk
 
Zeljko1234
Old
#194  
Zeljko1234's Avatar
Senior Member
Thanks Meter 1856
Posts: 2,892
Join Date: May 2010
Location: San Jose
Quote:
Originally Posted by Canadoc View Post
When I tried flashing the 18 kernel it darkened the screen until locking and unlocking the screen

Sent from my SM-N900W8 using Tapatalk
True, but I wouldn't care much about it.
Motorola Droid Razr Maxx HD unlocked with optimized CM11
LG G Pad 8.3 unlocked with LINARO/SABERMOD CyanogenMod 11
Motorola Atrix 4G (AT&T) unlocked with (MROM CM7) CM9 with Polish(ed) 3.1.10 kernel
Nexus 7 unlocked with CM11 my own build
 
ASW1
Old
#195  
Senior Member
Thanks Meter 35
Posts: 238
Join Date: Dec 2013
Location: Staatsliedenbuurt
Quote:
Originally Posted by Canadoc View Post
When I tried flashing the 18 kernel it darkened the screen until locking and unlocking the screen
Isn't that what twrp 2.7.0.1 is supposed to fix?
 
Zeljko1234
Old
#196  
Zeljko1234's Avatar
Senior Member
Thanks Meter 1856
Posts: 2,892
Join Date: May 2010
Location: San Jose
Quote:
Originally Posted by ASW1 View Post
Isn't that what twrp 2.7.0.1 is supposed to fix?
Not really. New twrp fixed splash screen but when rom starts boot then boot animation is darkened, same as booted rom. Nothing really important, after first lock/unlock brightness back to normal.
Motorola Droid Razr Maxx HD unlocked with optimized CM11
LG G Pad 8.3 unlocked with LINARO/SABERMOD CyanogenMod 11
Motorola Atrix 4G (AT&T) unlocked with (MROM CM7) CM9 with Polish(ed) 3.1.10 kernel
Nexus 7 unlocked with CM11 my own build
 
LBJM
Old
#197  
Senior Member
Thanks Meter 37
Posts: 322
Join Date: Feb 2011
Quote:
Originally Posted by Canadoc View Post
When I tried flashing the 18 kernel it darkened the screen until locking and unlocking the screen

Sent from my SM-N900W8 using Tapatalk
It's the setting of the 18a kernel at boot up. If you watch it boot up it darkens when the LG logo comes up. It would of been nice if LG made a way to toggle the setting, it makes for a great night time mode.
 
iamsuper123
Old
#198  
Senior Member
Thanks Meter 191
Posts: 282
Join Date: Jun 2011
Quote:
Originally Posted by id10terror View Post
Stock LG Leaked Build KOT49I.V50018a + BusyBox + Root
for LG G Pad 8.3 V500 ONLY!
Android 4.4.2 KitKat


Disclaimer:
Use this at your own risk. I have personally flashed and tested this build on my own device successfully.
I am not responsible for any damage or data loss encountered due whatever reason.
Please ensure that you make a full backup of your system before flashing anything.



Features:

  • Stock 4.4.2 LG Leaked Build KOT49I.V50018a + Stock 4.4.2 Kernel
  • Doesn't Wipe Data partition.. (although I'd suggest you do a factory reset from TWRP if you encounter any issues)
  • Doesn't flash over existing Recovery, ABOOT, or BootLoaders (means you can keep TWRP and retain loki_patch capabilities)
  • SuperSU 1.93 + su binary Installed
  • BusyBox 1.22.1-Stericson Installed
  • build.prop changed to reflect US region (this build had default region EU)
  • Wipes Dalvik-Cache and Cache partition


Downloads:
LG-V500_KOT49I.V50018a_Stock-BB-Rooted.zip


Mirror (please use main download link above when possible):
LG-V500_KOT49I.V50018a_Stock-BB-Rooted.zip (hosted on id10terror.net)



md5:
73ddd78d135a0cd64e562913b001fa42 LG-V500_KOT49I.V50018a_Stock-BB-Rooted.zip



Prerequisites:
  • TWRP 2.7.0.0 Installed and working (not tested on CWM recovery)
  • FULL nandroid Backup
  • At least 3GB free space on internal memory (not including ZIP file)


Install:
  1. Boot into TWRP recovery.
  2. *** Make a Full backup before proceeding. ***
  3. Flash .zip file in TWRP recovery.
  4. Go take a walk, make some coffee, pace around nervously. Keep Calm... this will take a while! Be patient!!
  5. Flash TWRP 2.7.0.1 for 4.4.2 in recovery (if not already installed)
  6. Reboot device.
  7. Enjoy!!


NEW! Great Install Tutorial Video by @Tomsgt !



Many Thanks to
@Aeras76 - for providing leaked TOT file
@Jessooca - for posting the links and mirrors
@Chainfire - for SuperSU and install script
@jazzruby - BusyBox install script
@Tomsgt - for his cool install tuturial video


I have already installed the drivers for LG on my laptop but still no luck

I have rooted my V500 tablet.

Running STOCK LG G Pad 4.4.2


Androi Version: 4.4.2
Kernel Version: 3.4.0
Build Number: KOT49I.V50020d
Software Version: V50020d

It seems like all theTWRP available online is for users coming from 4.2.2. I alt ready have stock 4.4.2 but I want to install CM11 but no way to install recovery ?
 
iamsuper123
Old
#199  
Senior Member
Thanks Meter 191
Posts: 282
Join Date: Jun 2011
Quote:
Originally Posted by iamsuper123 View Post
I have already installed the drivers for LG on my laptop but still no luck

I have rooted my V500 tablet.

Running STOCK LG G Pad 4.4.2


Androi Version: 4.4.2
Kernel Version: 3.4.0
Build Number: KOT49I.V50020d
Software Version: V50020d

It seems like all theTWRP available online is for users coming from 4.2.2. I alt ready have stock 4.4.2 but I want to install CM11 but no way to install recovery ?
anyone ? please ?

Tags
gpad, kitkat, v500
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes