[KERNEL][INTL][TW-AOSP 4.4,5.0,5.1][05/02/2015] KT-SGS5 - OB1 - KTweaker
- Thread starter ktoonsez
- Start date
All Faux Sound does is increase the volume so may as well use this instead http://xdaforums.com/showthread.php?t=2729652
That and Viper for better control.
+1
I am on NG7 + this kernel and I also use that mod. I used v4a to boost media volume but it was very weak boost. this mod does the job.
Last edited:
My viper stop processing a few minutes after screen of. Its annoying
Did you greenify the app? If you did that's the cause of it stopping when the screen is off
I tried going back to stock kernel because I have to send my phone to sprint I flashed the .zip file and ktweaker was still there can I remove it or did I do something wrong when I flashed
Hey @ktoonsez... hope u doing good.
I am S5 user but unfortunately 900H. U know very less development for my phone.
Can u do me a little favor ?
I don't demand so much but if i provide my stock kernel can u change SeLinux to "permissive" ?
Thankful to u my friend.
Hope to hear from u soon.
Sent from my SM-G900H using Tapatalk
I am S5 user but unfortunately 900H. U know very less development for my phone.
Can u do me a little favor ?
I don't demand so much but if i provide my stock kernel can u change SeLinux to "permissive" ?
Thankful to u my friend.
Hope to hear from u soon.
Sent from my SM-G900H using Tapatalk
AOSP with updated ramdisk from elelinux's kernel
http://goo.gl/XNzuis
Sent from my SM-G900V using XDA Premium 4 mobile app
http://goo.gl/XNzuis
Sent from my SM-G900V using XDA Premium 4 mobile app
Hi all
I m on stock sammy ne2 rom with philz recovery + this kernel of course since a long time now...how can I update my rom without losing this kernel(+recovery) and my settings in the ktweaker app?
Shall I download the firmware and flash through odin or proceed with ota update through system settings and during reboot flash the kernel again?
Thanks
Sent from my SM-G900F using XDA Free mobile app
I m on stock sammy ne2 rom with philz recovery + this kernel of course since a long time now...how can I update my rom without losing this kernel(+recovery) and my settings in the ktweaker app?
Shall I download the firmware and flash through odin or proceed with ota update through system settings and during reboot flash the kernel again?
Thanks
Sent from my SM-G900F using XDA Free mobile app
Chaitanyapatel8880
Senior Member
1. Backup the kernel settings using KT app.
2. Update or flash any rom you would like.
3. flash the kernel.
4. open KT app and restore the settings.
Similar threads
- Locked
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
132Ktoonsez presents:
What you can expect to get benchmark wise:
******* END OF LIFE *******
KTweaker Shop and previous versions can be seen here (thanks to LuigiBull23):
http://xdaforums.com/showthread.php?t=2784319
Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
Post #2 will be reserved for change logs
Post #3 will be reserved for MY Settings, Extras and FAQ's
Sources can be found here:
https://github.com/ktoonsez/KTSGS533
Change Log 02.25.2015
1. Set TW 5.0 SELinux to permissive.
2. Updated ramdisk for AOSP version.
3. KTweaker version 9.0!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
4. Added slider drawer for easy navigation
5. Profiles and set on boot options can be easily loaded from the drawer
6. Menu button still retained the easy navigation items like CPU, GPU, Scheduler Settings....
7. Old "Tools" screen is now called "Utilities"
8. New "Utilities" item: SELinux changer
9. New "Utilities" item: Get Phone Information
10. New "UI Settings" item: Startup Drawer Status is used to set whether the drawer is open or closed when starting the app
11. New "UI Settings" item: Startup Screen is used to set which screen starts up when opening the app. You can pick from the list of screen available for startup or specify "Remembeer last screen" to make it go back to the last screen you were on.
12. New "UI Settings" item: Main Background is used to set the color or an image to be used as the background in the main part of the screen. I have predefined ones and you can also pick from a image that you place in the /KTweaker/ThemeManager/Backgrounds folder
13. New "UI Settings" item: Main Fore Color is used to set the color to be used as the fore color in the main part of the screen.
14. New "UI Settings" item: Drawer Background is used to set the color or an image to be used in the Drawer part of the screen. I have predefined ones and you can also pick from a image that you place in the /KTweaker/ThemeManager/Backgrounds folder
15. New "UI Settings" item: Drawer Fore Color is used to set the color to be used as the fore color in the Drawer part of the screen.
16. New "UI Settings" item: Main Screen: Show Icons is used to specify if you want the icons to show in the main part of the screen.
17. New "UI Settings" item: Drawer: Show Icons is used to specify if you want the icons to show in the Drawer part of the screen.
18. New Menu item: "Reset Color Scheme" is used to reset everything back to stock if you mess up a setting for back/fore color items.
19. All icons are now customizable too!!!! So if you dont like my icons all you have to do is download http://ktoonsez.jonathanjsimon.com/sgs5/StockKTweakerIcons.zip, extract them onto your PC so you can see the names of the icons for the different items, replace the ones you want with yours, then place them in the KTweaker/ThemeManager/Icons/ folder on your phone, DONE!!!!
20. As a result of all these options in UI Settings this give you the ability to share your Theme if you want by zipping up the KTweaker/ThemeManager/Settings/, KTweaker/ThemeManager/Backgrounds/, KTweaker/ThemeManager/Icons/ folders
21. Thats all I can think of right now, ENJOY THE AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!32
Change Log 03.25.2015
1. ktoonservativeq: Totally revamped
2. NEW tunable lockout_changes_when_boosting used to lockout changes to frequency and hotplugging activities during touch/button boost (this basically makes touch boost behave the old way before all the new code)
3. NEW tunable cpu_load_adder_at_max_gpu_ignore_tb used to ignore gpu cpu load adder during a touch/button boost
4. Modified all global vars placement so governor can run on all 4 cores instead of controlling them thru proxy
5. Optimized code adding more sub functions to reduce code
6. Moved global counters into cpu_dbs_info_s struct so each core keeps there own version
7. sing new debug_enabled tunable from previous commit added a few more debug lines for keeping track of load and hotplugging activities
8. All hotplugging activities are mutex protected
9. Added some more effective boost code upon wakeup
10. KTweaker version 9.1
11. KTweaker: Fix up previous screen tracking for Governor Adjustments screen
12. KTweaker: Will now set the selected governor to ALL 4 CORES!
13. Ramdisk update for AOSP version from CM latest
14. New ktoonsified v4 in Shop for new kernel, works great on TW or AOSP, currently running TW and I can not believe how much faster it is on this new version!!!!!!!!!!!!!!!!!!!!!!!!!30Go to my original thread to view Change logs:
http://xdaforums.com/showpost.php?p=53276353&postcount=227
Change Log 03.27.2015
1. fastcharge: Add some blocking code for functions reducing chargin current and setting some variables for 3rd party apps
2. cpufreq: Add some protection when setting policy changes. Add some disabled debug messages in case I need them later. Remove usleep call after calling cpu_up()
3. cpufreq: Add main_cpufreq_control global var to make other modules aware that the main cpufreq code is bringing a core up so they will not take the core down.
4. ktoonservativeq: Modify some code to make sure hotplug cores obey touch_boost_cpu_all_cores during boostpulse while sync cores is off
5. cpufreq: Disable some extra booster code on wake for testing
New posts
-
-
Development OP11-Salami-OPCAM-A14-ROM-KERNELSU-WATCHDOGS-APR 24, 2024
- Latest: franzpimp87
